Simplicity 1695514, 1695468, 522E instruction sheet Starting the Engine, Stopping the Engine

Page 18

Controls & Operation

STARTING THE ENGINE

NOTE: The snowthrower engine is designed to operate at cold temperatures. Avoid operating the snowthrower if air temperature is 40° For warmer since engine may vapor lock and stop running after a short time. Engine will be difficult to start in warm weather.

WARNING

Electric start precautions:

•Use only with a grounded, polarized 120V AC outlet. Do not modify the plug to fit into any other type of outlet.

•Use only the power cord supplied with the unit. DO NOT use a damaged cord.

•Be sure there is no moisture present on the cord ends or receptacles when connecting to an outlet or to the unit.

Electric Starting Steps

NOTE: The electric starter is designed to operate on 120V AC household current, using power cord supplied with electric start snowthrower. When using power cord, match wide blade of plug to wide slot of receptacle.

1.Insert engine key in switch and turn key to the ON position.

2.If engine is cold, move choke control lever to the ON position. (Do not choke a warm engine).

3.Push the primer button two times if engine is cold. (Do not prime a warm engine.)

4.Plug power cord for starter into receptacle on starter switch, then plug other end into a 120 Volt AC house- hold receptacle. DO NOT use an extension cord with the electric start power cord supplied.

5.Push starter button to crank engine. DO NOT crank engine for more than a total of 15 seconds without allowing electric starter to cool for 10 minutes before additional cranking is attempted. Electric starter can be severely damaged if recommended starter operat- ing limitations are not observed.

NOTE: Do not push primer button while engine is being cranked.

6.Release starter button when engine starts and gradu- ally move choke lever to the OFF position.

NOTE: Always disconnect power cord from house- hold receptacle first, then unplug from starter switch.

7.Disconnect power cord from household receptacle and then from starter switch on snowthrower. Store cord in a dry, convenient place.

8.To stop engine, turn engine key to the OFF position.

Manual (Recoil) Starting Steps

1.Insert engine key in switch and turn key to the ON position.

2.If engine is cold, move choke control lever to the ON position. (Do not choke a warm engine).

3.Push the primer button two times if engine is cold. (Do not prime a warm engine.)

4.Grasp starter rope handle and slowly pull out rope until resistance is felt. Allow rope to rewind slowly, then pull rope out rapidly to start engine. Let rope return slowly to starter.

NOTE: If engine does not start after three pulls, push primer bulb once and again pull starter rope.

5.After engine starts and gradually warms up, move choke lever to the OFF position. Be prepared to move choke lever to the ON position if engine falters during warm up.

6.Allow engine to warm up before beginning snowthrower operations. The engine will operate at full throttle when thoroughly warmed up.

7.To stop engine, turn engine key to the OFF position.

DANGER

Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains CARBON MONOXIDE, an ODORLESS and

DEADLY GAS.

STOPPING THE ENGINE

1.Release the auger control.

2.Turn engine key to the OFF position.

3.Remove the key from the switch if you are leaving the operating position or will be making adjustments or repairs. (NOTE: Allow the unit to cool before storing or making any adjustments or repairs.)

NOTE: If you will be storing the unit for the season, see the STORAGE section for instructions on properly preparing the unit for long-term storage.

14

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Print Vendor Instructions Operator’s ManualsPage OPERATOR’S Manual 522E ModelsPage Table of Contents Safety Rules & Information Operating Safety Safety Rules and Information Moving PartsSafety Rules & Information TrainingSafety Rules ChildrenNorth American Product IdentificationCE Identification TAG Markings ModelsInternational Symbols Safety DecalsTools Required Assembly ProcedureAssembling Snowthrower Removal from CartonAssembling the Snowthrower EngineControls Operation Snowthrower ControlsControls & Operation Engine & Starting ControlsChecks Before Each START-UP Operational WarningsAdding Engine OIL Adding FuelStarting the Engine Stopping the EngineAfter Each USE Operating the SnowthrowerSnowthrowing Tips OFF-SEASON StorageRegular Maintenance LubricationService Chute Removal InstallationTroubleshooting & Service Cover Removal InstallationTroubleshooting & Service Replace Drive BeltServicing the Spark Plug Servicing Spark PlugAuger Drive Cable Adjustment Specifications Parts & Accessories

522E, 1695468, 1695514 specifications

The Simplicity 522E, along with models 1695514 and 1695468, represents a new era of innovation and performance in outdoor power equipment. These models are designed for users who prioritize efficiency, ease of use, and advanced technology in their lawn care and maintenance routines.

One of the standout features of the Simplicity 522E is its powerful engine, which offers robust performance for various mowing conditions. The engine is designed for reliability, ensuring that users can tackle even the toughest grass with ease. This model is equipped with a high-performance cutting deck that provides a clean and precise cut, promoting healthier grass growth and a pleasing aesthetic for your lawn.

The 1695514 and 1695468 models also emphasize ergonomic design, ensuring that operation is comfortable and user-friendly. With adjustable handles and easy-to-reach controls, these machines reduce operator fatigue during extended use. This consideration for user comfort is complemented by lightweight construction, making maneuvering around the yard a breeze.

In terms of technology, the Simplicity 522E incorporates advanced features such as automatic choke systems, which optimize engine performance by adjusting to varying temperature conditions automatically. This innovative technology aids in starting the engine in all weather conditions, ensuring that users spend less time troubleshooting and more time enjoying their perfectly manicured lawns.

All three models are equipped with a mulching feature that efficiently recycles grass clippings back into the lawn, which can improve soil health and reduce the need for chemical fertilizers. The easy-to-engage mulch mode allows users to switch between mulching and bagging effortlessly, adapting to the specific needs of their lawns.

Durability is another hallmark of these models. Constructed with high-quality materials, the Simplicity 522E and its counterparts are built to withstand the rigors of regular use. This promotes longevity and ensures that users can depend on their equipment year after year.

In summary, the Simplicity 522E, along with models 1695514 and 1695468, combines power, innovation, and user-centered design. With their advanced engine technology, ergonomic features, and emphasis on durability, these models stand out as top choices in the competitive landscape of outdoor power equipment. Perfect for homeowners and lawn care professionals alike, they represent a commitment to quality and performance in every aspect.
Top Page Image Contents