Simplicity Essential Storage Guide for Your 860 Snowblower

Page 19

Storage

TEMPORARY STORAGE (30 DAYS OR LESS)

Remember, the fuel tank will still contain some gasoline, so never store the unit indoors or in any other area where fuel vapor could travel to any ignition source. Fuel vapor is also toxic if inhaled, so never store the unit in any structure used for human or animal habitation.

Here is a checklist of things to do when storing your unit temporarily or in between uses:

Keep in an area away from where children may come into contact with it. If there’s any chance of unauthorized use, remove the spark plug (s) and put in a safe place. Be sure the spark plug opening is protected from foreign objects with a suitable cover.

If the unit can’t be stored on a reasonable level surface, chock the wheels.

Clean all debris and snow from the unit.

NOTE: If storing your unit between winter snow removal jobs in a cold area, we suggest that you fill the fuel tank at the completion of each job to prevent water condensation in the fuel tank. Wait for engine to cool before filling tank.

LONG TERM STORAGE (LONGER THAN 30 DAYS)

Before you store your unit for the off-season, read the Maintenance and Storage instructions in the Safety Rules section, then perform the following steps:

1.Drain crankcase oil and refill with a grade of oil that will be required when unit is used again.

2.Coat all bare metal surfaces with paint or light coat of oil to prevent rusting.

3.Clean external surfaces and engine.

4.Prepare engine for storage. See engine owner’s manual.

5.Clean any dirt from the engine housing.

6.Cover air intake and exhaust outlet tightly with plastic or other waterproof material to keep out moisture, dirt and insects.

7.Completely grease and oil as outlined in the Normal Care section.

8.If equipped, be sure the battery is filled to the proper level with water and is fully charged. Battery life will be increased if it is removed, put in a cool, dry place and fully charged about once a month. If battery is left in, disconnect the negative cable.

WARNING

Never store the unit, with gasoline in engine or fuel tank, in a heated shelter or in enclosed, poorly ventilated enclosures. Gasoline fumes may reach an open flame, spark or pilot light (such as a furnace, water heater, clothes dryer, etc.) and cause an explosion.

Handle gasoline carefully. It is highly flammable and careless use could result in serious fire damage to your person or property.

Drain fuel into an approved container outdoors away from open flame or sparks.

10.Drain fuel system completely or add a gasoline stabilizer to the fuel system. If you have chosen to use a fuel sta- bilizer and have not drained the fuel system, follow all safety instructions and storage precautions in this man- ual to prevent the possibility of fire from the ignition of gasoline fumes. Remember, gasoline fumes can travel to distant sources of ignition and ignite, causing risk of explosion and fire.

NOTE: Gasoline, if permitted to stand unused for extended periods (30 days or more), may develop gummy deposits which can adversely affect the engine carburetor and cause engine malfunction. To avoid this condition, add a gasoline stabilizer to the fuel tank or drain all fuel from the system before placing unit in storage.

STARTING AFTER

LONG TERM STORAGE

Before starting the unit after it has been stored for a long period of time, perform the following steps.

1.Remove any blocks from under the unit.

2.Install the battery if it was removed.

3.Unplug the exhaust outlet and air cleaner.

4.Fill the fuel tank with fresh gasoline. See engine manual for recommendations.

5.See engine owner’s manual and follow all instructions for preparing engine after storage.

6.Check crankcase oil level and add proper oil if necessary.

7.Inflate tires to proper pressure.

8.Start the engine and let it run slowly. DO NOT run at high speed immediately after starting. Be sure to run engine only outdoors or in well ventilated area.

15

Image 19
Contents Operator’s Manuals Print Vendor InstructionsPage Models DLX ModelsPage Table of Contents Do Not Safety Rules & InformationGeneral Operation Slope OperationEmissions Safety RulesService and Maintenance ChildrenPreparation Maintenance and StorageAnsi B71.3-1995 Warnings TrainingCE Model Decals DecalsDecals North American Model DecalsSafety Icons Safety IconsCE Models Identification NumbersCE Identification TAG Markings North AmericanSpeed Selector Features, Controls, & OperationFeatures & Controls Checks Before Each START-UP OperationElectric Start Button Optional Starting the EngineBriggs & Stratton Models Engine Mounted Electric Start Press the starterWill Continue until the Free-Hand Control is released Operating the SnowthrowerGround Speed Selector Engine SpeedModels with Remote Deflector Control DeflectorScraper BAR & Skid Shoes Models with Chute Deflector KnobEasy Turn When Pushing the SnowthrowerFull Traction Easy Turn Traction Easy Turn Freewheeling Traction Drive LockLong Term Storage Longer than 30 Days StorageStarting After Long Term Storage Checking Tire Pressure Regular MaintenanceMaintenance Schedule Maintenance Required Service IntervalLubrication Regular MaintenanceImportant Note Troubleshooting Troubleshooting, Adjustments, ServiceProblem Possible Cause Remedy Poor traction Auger does not stop when augerAuger rotates, but snow is not Thrown far enoughTraction Drive Tension AdjustmentsSpeed Selector Adjustment Auger Drive TensionGear Bracket Adjustment Manual Discharge Chute Control Linkage AdjustmentElectric Discharge Chute Rotator Motor Adjustment Pinion Gear AdjustmentEasy Turn Cable Adjustment Adjustments & ServiceShear PIN Replacement Belt Replacement ServiceTion Drive Tension Chassis SpecificationsDimensions EngineTechnical Manuals Parts & AccessoriesReplacement Parts Maintenance Items

1694444, 1693653, 1170, 1694443, 1693655 specifications

Simplicity is a renowned brand in the world of advanced electronic design, with a robust portfolio that includes the models 1693652, 1694241, 1694243, 1694237, and 1694442. Each of these models presents unique features and technologies, tailored to meet the needs of various applications in today's fast-paced electronic environment.

The Simplicity 1693652 is known for its streamlined design and efficient functionality. It integrates advanced microcontroller technology, providing low-power consumption while maintaining high performance. This model is particularly suited for portable applications, where battery life is crucial. The user-friendly interface allows for quick setup and programming, making it ideal for developers looking for efficient implementation.

The 1694241 model stands out with its robust connectivity options. Equipped with Bluetooth and Wi-Fi capabilities, it supports seamless data transfer and remote control functionalities. This model is designed for IoT applications, facilitating communication between devices in a smart home or industrial setting. With its enhanced security protocols, users can feel confident in the safety of their data.

Next, the Simplicity 1694243 emphasizes versatility and adaptability. It features a modular architecture, enabling users to customize hardware components according to specific project requirements. This flexibility allows developers to easily upgrade or modify the system, ensuring longevity and relevance. The model's extensive library of software support further simplifies development, accelerating time-to-market for new products.

The 1694237 model excels in real-time processing capabilities. Its architecture is optimized for high-speed data handling, making it suitable for applications involving robotics or automated systems. With an emphasis on reliability, this model also features built-in error correction techniques, ensuring smooth operation even under demanding conditions.

Lastly, the Simplicity 1694442 is tailored for advanced sensory applications. It boasts an array of integrated sensors, including temperature, humidity, and motion detectors. This model is ideal for developing smart environmental monitoring systems, making it popular in green technology initiatives. With low latency data processing, users can receive immediate feedback, enhancing the overall user experience.

Together, these Simplicity models represent a commitment to innovation and quality, addressing the diverse needs of today's technology landscape. Their combined features and cutting-edge technologies ensure that users can tackle a variety of challenges with confidence and ease. Whether for professional development or personal projects, Simplicity's offerings stand out as reliable solutions for modern electronic design.