Simplicity Snow Blower Manual: 1060, 860, Service & Gearbox Oil Guide

Simplicity Snow Blower Manual: Maintenance, Oil Changes, and Gearbox Lubrication

Page 20

Regular Maintenance

MAINTENANCE SCHEDULE

Maintenance Required	Service Interval	Notes

Check auger gear case oil level*	25 Hours	Use Simplicity Winter Weight
		Worm Gear Oil

Lubricate snowthrower	10 Hours	Use 10W Oil and Automotive
		Lithium Grease

Check tire pressure	Monthly	Inflate to 20 psi (1.37 bar)

Check/Change engine oil**	Check oil before each	None
	use **

Replace spark plug**	Yearly**	None

Check drive linkage & belt tension	4-6 Hours	None

* If lubricant leaks out, have the unit inspected by your authorized dealer.
** See your engine owner’s manual for engine-related information.

CHECKING TIRE PRESSURE

The air pressure in each tire (Figure 8) should be 20 psi (136 kPa) and should be equal for both tires for best per- formance. Be sure to keep caps on valves to prevent entry of debris into the valve stem when tires are filled.

AUGER GEAR CASE LUBRICATION

1.Place the snowthrower on a level surface.

2.Remove the pipe plug (A, Figure 9).

3.Check the lubricant level. It should be level with the lower edge of the plug opening. If not, add Simplicity Winter Weight Worm Gear Oil (available from your dealer).

4. Re-install pipe plug, and tighten securely.

Figure 8. Checking Tire Pressure

Figure 9. Auger Lubrication A. Pipe Plug

Image 20

Contents

Print Vendor Instructions Operator’s ManualsPage DLX Models ModelsPage Table of Contents Safety Rules & Information General OperationSlope Operation Do NotSafety Rules Service and MaintenanceChildren EmissionsMaintenance and Storage Ansi B71.3-1995 WarningsTraining PreparationDecals DecalsNorth American Model Decals CE Model DecalsSafety Icons Safety IconsIdentification Numbers CE Identification TAG MarkingsNorth American CE ModelsFeatures, Controls, & Operation Speed SelectorFeatures & Controls Operation Checks Before Each START-UPStarting the Engine Briggs & Stratton ModelsEngine Mounted Electric Start Press the starter Electric Start Button Optional Operating the Snowthrower Ground Speed Selector Engine Speed Will Continue until the Free-Hand Control is releasedDeflector Scraper BAR & Skid ShoesModels with Chute Deflector Knob Models with Remote Deflector ControlWhen Pushing the Snowthrower Full Traction Easy Turn TractionEasy Turn Freewheeling Traction Drive Lock Easy TurnStarting After Long Term Storage StorageLong Term Storage Longer than 30 Days Regular Maintenance Maintenance ScheduleMaintenance Required Service Interval Checking Tire PressureImportant Note Regular MaintenanceLubrication Problem Possible Cause Remedy Troubleshooting, Adjustments, ServiceTroubleshooting Auger does not stop when auger Auger rotates, but snow is notThrown far enough Poor tractionAdjustments Speed Selector AdjustmentAuger Drive Tension Traction Drive TensionManual Discharge Chute Control Linkage Adjustment Electric Discharge Chute Rotator Motor AdjustmentPinion Gear Adjustment Gear Bracket AdjustmentShear PIN Replacement Adjustments & ServiceEasy Turn Cable Adjustment Service Belt ReplacementTion Drive Tension Specifications DimensionsEngine ChassisParts & Accessories Replacement PartsMaintenance Items Technical Manuals

Simplicity Snow Blower Manual: Maintenance, Oil Changes, and Gearbox Lubrication