Simplicity 1693561 PTO Clutch Adjustment, Brake Linkage Adjustment, Burnishing The Clutch

Page 33

PTO CLUTCH ADJUSTMENT

Burnishing The Clutch

Before the front PTO clutch is used for the first time, it should be burnished as follows. To burnish the clutch, the mower must be installed.

1.Start the engine and set at full throttle.

2.Pull the front PTO switch out to the on position, leave for 15 seconds, then push in to the off position.

3.Repeat ten times to burnish the clutch.

PTO Clutch Adjustment

WARNING

The muffler and surrounding areas can be extremely hot. Allow the engine to cool before performing this procedure.

1.Remove the tractor hood by disconnecting the head- light coupler and then removing two hinge hooks.

2.Use a 0.015” feeler gauge to check front clutch at three slots (A, Figure 39). There should be a slight resistance as gauge is moved in and out of slot. If tight or loose, proceed to step 3.

3.Loosen or tighten one of the nuts (B, Figure 39) to achieve slight drag on feeler gauge. Check the other two slots and adjust accordingly.

NOTE: Adjustment at one location will change adjust- ment at the two other slots. Make sure all three locations have proper adjustment.

4.With tractor in neutral, PTO disengaged and operator in seat, start the tractor engine.

5.Engage the front PTO and wait several seconds. Disengage the front PTO and check the amount of time it takes for the mower drive belt to stop.

6.If mower drive belt does not stop within five seconds, repeat steps 1-3. If the belt still does not stop within 5 seconds, see your dealer.

BRAKE LINKAGE ADJUSTMENT

1.Turn off the engine and remove the key from the igni- tion. DO NOT engage the parking brake.

2.Remove the back bumper to gain access to the brake rod adjustment nut (A, Figure 40).

3.Angle the brake assembly arm so that is standing straight up. Hold in place.

4.With the brake assembly arm straight up and the brake pedal at rest, turn the brake rod adjustment nut (A, Figure 40) until the spacer (C) contacts the brake pivot arm (D). Do not over-tighten. Over-tightening will cause the brake to drag.

Troubleshooting, Adjustment & Service

WARNING

To avoid serious injury, perform adjustments only with engine stopped, key removed and tractor on level ground.

A

A

B

 

 

B

 

 

 

A

 

 

B

 

Figure 39. Front PTO Adjustment

A.Slots

B.Nuts

C

A

B

D

Figure 40. Brake Linkage Adjustment

A.

Brake Rod Adj. Nut

C.

Spacer

B.

Brake Assy. Arm

D.

Brake Pivot Arm

29

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Paper Size Operator’s ManualsPress BinderyPage OPERATOR’S Manual Page Table of Contents Safety Rules & Information Safety Rules and Information Do NotChildren Service and Maintenance Safety Rules & InformationNorth American CE Identification TAG MarkingsModels CE ModelsSafety Decals Decal Operating Instructions Bottom PanelDecal Danger Decal Hydraulics Optional Page Control Functions Features & Controls Dashboard Display Functions Test 1 Engine should not crank if Operational Safety ChecksTest 2 Engine should crank if Test 3 Engine should Shut OFF ifChecks Before Starting General Operating SafetyStarting the Engine Operating the TractorStopping the Tractor Engine Driving the TractorAuxiliary Hydraulic System Optional Pushing & Towing the TractorGeneral Control Lever FunctionsTest Run Attachment & Check Oil Connecting Hydraulic HosesBumper Removed For Clarity TransmissionMower Deck Removal Installation Removing the Mower DeckMower Mower Electrical Connection Installing the Mower DeckStorage Before Every Spring Check Tire PressuresFall Tire PressureChecking / Adding Fuel Regular MaintenanceOIL & Filter Change Check / Change AIR FilterInspect & Replace Spark Plugs Change Antifreeze Liquid Cooled Models only CHECK/CLEAN OIL Cooler 23HP Models onlyCheck Transmission OIL Level Changing Transmission Fluid & FilterGrease LubricationOil Transmission FilterLift Rod Grease Grease the ElectricFitting Yearly Arm Grease Fitting YearlyBattery Maintenance Checking the Battery FluidCleaning the Battery and Cables Blade Brake Check Servicing the Mower BladesTroubleshooting Tractor Troubleshooting Troubleshooting, Adjustment & ServiceBrake Linkage Adjustment PTO Clutch AdjustmentPTO Clutch Adjustment Burnishing The ClutchHeadlight Replacement Tractor PTO Belt ReplacementTaillight & Dashlight Replacement To avoid damaging belts, do not PRYRoller Bracket Adjustment 60 Mower Only Mower AdjustmentsPulley Stop Adjustment 48 Mower Only Gauge Wheel Adjustment 54 Mower OnlyLeveling The Mower Cutting Height AdjustmentMower Drive Belt Replacement Mower Belt ReplacementMower Deck 54 Mowers Battery Charging Specifications Dimensions Section TitleTransmission Hydro Replacement Parts Parts & AccessoriesOptional Accessories Maintenance Items

1693116, 1693128, 1692870, 1693134, 1692871 specifications

Simplicity is a prominent player in the world of electronics, and its latest offerings are a testament to the brand's commitment to innovation and user-centric design. Among their recent products, the models 1693112, 1693134, 1693118, 1693561, and 1693250 stand out with their unique features and advanced technologies.

The Simplicity 1693112 is designed with a focus on usability, featuring an intuitive interface that simplifies navigation for users of all skill levels. It boasts a powerful processor that ensures seamless performance, whether for casual browsing or heavy-duty applications. The device is also equipped with an extended battery life, maximizing productivity without the frequent need for charging.

In contrast, the Simplicity 1693134 emphasizes connectivity, featuring multiple ports and wireless options for enhanced functionality. This model is perfect for tech-savvy individuals who rely on various devices and need versatility in their gadgets. The incorporation of advanced Bluetooth and Wi-Fi technologies allows for quick sharing and data transfer, making it ideal for both personal and professional use.

The Simplicity 1693118 is tailor-made for multimedia enthusiasts. With a high-resolution display and superior audio quality, this model provides an immersive experience for videos, games, and music. The enhanced graphics processing unit guarantees smooth visuals, making it a favorite among gamers and content creators alike.

For those seeking durability, the Simplicity 1693561 is built to last. With a rugged design that includes shock-resistant features, this model is less susceptible to damage from accidental drops or rough usage. It is particularly suited for outdoor adventures and demanding work environments where resilience is key.

Lastly, the Simplicity 1693250 focuses on energy efficiency. This model incorporates eco-friendly technologies that minimize power consumption without sacrificing performance. Users can enjoy reduced energy costs while benefiting from a product that aligns with sustainability goals.

In summary, the Simplicity models 1693112, 1693134, 1693118, 1693561, and 1693250 are a diverse range of products catering to various user needs. Each model presents unique features, ensuring that there's a perfect fit for everyone, whether they prioritize usability, connectivity, multimedia capability, durability, or energy efficiency. As technology continues to evolve, Simplicity remains at the forefront, delivering products that truly enhance the user experience.
Top Page Image Contents