Sharp XG-P25X LENS Button, Remote control Digital Image Adjustments, Keystone setting, Projector

LENS Button

Projector Remote control Digital Image Adjustments

	LENS
	∂/ƒ/ß/©
	UNDO
	ENTER
On-screen Display	On-screen Display
(Example: 4:3	(Example: 16:9
NORMAL image)	WIDE image)

This function can be used to adjust the focus, zoom, keystone, v-size and digital shift settings.

1Press LENS to select mode. Each time LENS is pressed, the screen changes as shown on the left.

2Press ENTER to display test pattern.

3Press ∂/ƒ/ß/© to make adjustments.

4a. Press LENS until normal screen appears.

b.To reset the “KEYSTONE”, “V-SIZE” and “DIGITAL SHIFT” setting, press UNDO.

• Do not touch the lens when adjusting the focus or zoom.

Setup & Connections

Keystone setting

Trapezoidal distortion is caused when the projector image is positioned away from the center axis of the screen. This function allows you to correct the keystone effect for excellent picture quality.

•Straight lines and the edges of the displayed image may appear jagged, when adjusting the KEYSTONE setting.

V-size setting

During keystone correction an error can occur in the aspect ratio depending on the amount of lens shift. Use the V-SIZE fine-tuning function to correct this error.

•V-SIZE is only displayed and can only be adjusted when performing KEYSTONE correction.

Digital shift setting

For easier viewing, this function shifts the image projected on the screen up or down eliminating either the upper or lower black band found in 16:9 and other wide aspect ratios.

•Digital shift function only works with BORDER, STRETCH or SMART

STRETCH of VIDEO and DTV inputs. (See page 35 for details.) The DIGITAL SHIFT screen is not displayed when projecting images other than WIDE.

Digital Shift

or

Press ∂. Press ƒ.

E-24

XG-P25X/CD (E)-b 24 02.3.19, 7:04 PM