Sharp XG-P25X operation manual Replacing the Lamp, Resetting the lamp timer

Replacing the Lamp

5 Replace the air filter.	6 cover.Replace the filter	7 cover.Remove the lamp cage
Place the air filter underneath the	Insert the tab on the end of the	Turn over the projector and
tabs on the filter frame.	filter cover into the filter cover	loosen the user service screw
	opening and press the filter	that secures the lamp cage
	cover into position.	cover. Then slide the cover in
		the direction of the arrow.
	Tab

			User service screw
8 cage.Remove the lamp		9 Insert the new lamp cage. 10 cover.Attach the lamp cage
Remove the securing screws		Press the lamp cage firmly into	Slide the lamp cage cover in
from the lamp cage. Hold the		the lamp cage compartment.	the direction of the arrow. Then
lamp cage by the handle and		Fasten the securing screws.	tighten the user service screw.
pull it towards you.
Securing	Securing
screw	screws
			User service screw

&Troubleshooting

Maintenance

Resetting the lamp timer

1 cord.Connect the power	2 Reset the lamp timer.
Plug the power cord into the AC	While pressing ƒ, © and	“LAMP 0000H” is displayed,
socket of the projector.	ENTER on the projector, press	indicating that the lamp timer is
	POWER ON on the projector.	reset.



• Reset the lamp timer only after replacing the lamp.

E-63

XG-P25X/CD (E)-g 63 02.3.19, 7:12 PM