Setting the Stacking Mode
You can double the brightness of an image by stacking two projectors and projecting same picture simultaneously. To control two projectors, assign one as the master and one as the slave. The slave projector will duplicate any operational settings made to the master projector. See page 38 for the procedure details.
•When the projector is set to “Master”, button operation signals will be transmitted through
•When the projector is set to “Slave”, operations follow the button operations sent from the “Master”.
•When set to slave, all buttons on the projector along with ∂/ƒ/ß/©, ENTER, UNDO, POWER ON, POWER OFF, LENS and MENU on the remote control can be used. The slave cannot operate the other buttons on remote control.
•For details on intended purpose, see pages 59 and 60 .
Locking the Operation Buttons on the Projector
This function can be used to lock the use of certain operation buttons on the projector. The user can still operate the projector fully with the remote control. See page 38 for the procedure details.
Selected item | Description |
Normal | All operation buttons are functional. |
|
|
Level A | Only Input/Volume/Mute functions on the |
| projector are available. |
|
|
Level B | All operation buttons on the projector are |
| unavailable. |
|
|
Basic Operation
•To cancel the Keylock Level, perform the above procedure using the remote control.
•See page 55 for details using the password function.
52 | 02.3.19, 7:10 PM |
