Sharp XG-P25X operation manual Product Disposal

PRODUCT DISPOSAL

This projector utilizes tin-lead solder, and a pressurized lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or, if you are located in the United States of America, the Electronics Industries Alliance: www.eiae.org .

Caution Concerning the Lamp Replacement

See “Replacing the Lamp” on pages 62 and 63 .

LAMP REPLACEMENT

CAUTION

BEFORE REMOVING THE SCREW, DISCONNECT

POWER CORD. HOT SURFACE INSIDE

ALLOW 1 HOUR TO COOL BEFORE REPLACING

THE LAMP. REPLACE WITH SAME SHARP LAMP

UNIT TYPE BQC-XGP25X//1 ONLY.

UV RADIATION : CAN CAUSE EYE DAMAGE.

TURN OFF LAMP BEFORE SERVICING.

MEDIUM PRESSURE LAMP : RISK OF EXPLOSION.

POTENTIAL HAZARD OF GLASS PARTICLES IF

LAMP HAS RUPTURED. HANDLE WITH CARE.

SEE OPERATION MANUAL.

Information Important

E-2

XG-P25X/CD (E)-a 2 02.3.19, 7:15 PM