Sharp XG-P25X Replacing the Air Filter, Cleaning and replacing the bottom air filter

Replacing the Air Filter

•This projector is equipped with two air filters to ensure the optimal operating condition of the projector.

•The air filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location.

•Have your nearest Sharp Authorized LCD Projector Dealer or Service Center exchange the filter (PFILD0080CEZZ) when it is no longer possible to clean it.

Bottom View Side and Rear View

Air filter Air filter (not removable)

Cleaning and replacing the bottom air filter

Turn off the power and	Remove the bottom	3	Remove the air filter.
1 disconnect the power	2 filter cover.
cord.
Press POWER OFF. Wait until	Turn over the projector. Press the	Grasp the air filter between your
the cooling fan stops.	tab and lift open the filter cover	fingers and lift it out of the filter
	in the direction of the arrow.	cover.
	Tab

4 Clean the air filter.	5 Replace the air filter.	6 cover.Replace the filter
Clean the dust off the air filter	Place the air filter underneath	Insert the tab on the end of the
and cover with a vacuum	the tabs on the filter frame.	filter cover into the filter cover
cleaner extension hose.		opening and press the filter
		cover into position.
		Tab

Troubleshooting Maintenance&

• Be sure the filter cover is securely installed. The power will not turn on unless it is correctly installed.

Cleaning the side air filter (not removable)

If dust or dirt has collected inside the air filter, clean the filter with a vacuum cleaner extension hose.

• The side air filter cannot be removed.

E-64

XG-P25X/CD (E)-g 64 02.3.19, 7:12 PM