Adjusting the Picture
OperationBasic
You can adjust the projector’s picture to your preferences with the following picture settings. See page 38 for the procedure details.
e. g. RGB input in INPUT 1 or 2 mode
Selected item | ß button | © button |
|
|
|
Contrast | For less contrast | For more contrast |
Bright | For less brightness | For more brightness |
Color | For less color intensity | For more color intensity |
Tint | Skin tones become purplish | Skin tones become greenish |
Sharp | For less sharpness | For more sharpness |
Red | For weaker red | For stronger red |
Blue | For weaker blue | For stronger blue |
Reset | All image adjustment items are returned to the factory preset | |
| settings. |
|
•“Color”, “Tint” and “Sharp” do not appear for RGB input in INPUT 1 or 2 mode.
•To reset all adjustment items, select “Reset” on the “Picture” menu screen and press ENTER.
•The adjustments can be stored separately in the INPUT 1 to 5 modes.
•Depending on the type of signal received, “Sharp” may not be adjustable for COMPONENT input in INPUT 1 or 2 mode.
Adjusting the Color Temperature
This function can be used to adjust the color temperature to suit the type of image input to the projector (video, computer image, TV broadcast, etc.). Decrease the color temperature to create warmer, reddish images for natural flesh tones, or increase to create cooler, bluish images for a brighter picture.
3 |
|
| 3 |
|
| ||
(Red) ß button | © button (Blue) | ||
Decreases color temperature for | Increases color temperature for | ||
warmer, reddish, | cooler, bluish, | ||
images. | |||
(Low color temperature) | (High color temperature) | ||
|
|
|
|
Selecting the Signal Type (RGB menu only)
This function allows you to select the input signal type RGB or COMPONENT for INPUT 1 or 2 port.
41 | 02.3.19, 7:08 PM |
