MTD 644E, 664G manual Maintenance and Storage

Page 4

5.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

6.Do not operate machine while under the influence of alcohol or drugs.

7.Muffler and engine become hot and can cause a burn. Do not touch.

8.Exercise extreme caution when operating on or crossing gravel surfaces. Stay alert for hidden hazards or traffic.

9.Exercise caution when changing direction and while operating on slopes.

10.Plan your snow-throwing pattern to avoid discharge towards windows, walls, cars etc. Thus, avoiding possible property damage or personal injury caused by a ricochet.

11.Never direct discharge at children, bystanders and pets or allow anyone in front of the machine.

12.Do not overload machine capacity by attempting to clear snow at too fast of a rate.

13.Never operate this machine without good visibility or light. Always be sure of your footing and keep a firm hold on the handles. Walk, never run.

14.Disengage power to the auger/impeller when transporting or not in use.

15.Never operate machine at high transport speeds on slippery surfaces. Look down and behind and use care when in reverse.

16.If the machine should start to vibrate abnormally, stop the engine, disconnect the spark plug wire and ground it against the engine. Inspect thoroughly for damage. Repair any damage before starting and operating.

17.Disengage all clutch levers and stop engine before you leave the operating position (behind the handles). Wait until the auger/impeller comes to a complete stop before unclogging the discharge chute, making any adjustments, or inspections.

18.Never put your hand in the discharge or collector openings. Always use the clean-out tool provided to unclog the discharge opening. Do not unclog discharge chute while engine is running.Shut off engine and remain behind handles until all moving parts have stopped before unclogging.

19.Use only attachments and accessories approved by the manufacturer (e.g. wheel weights, tire chains, cabs etc.).

20.If situations occur which are not covered in this manual, use care and good judgment. Contact your dealer or telephone 1-800-800-7310 for assistance and the name of your nearest servicing dealer.

MAINTENANCE AND STORAGE

1.Never tamper with safety devices. Check their proper operation regularly. Refer to the maintenance and adjustment sections of this manual.

2.Before cleaning, repairing, or inspecting machine disengage all clutch levers and stop engine. Wait until the auger/impeller come to a complete stop. Disconnect the spark plug wire and ground against the engine to prevent unintended starting.

3.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage.

4.Do not change the engine governor setting or over-speed the engine. The governor controls the maximum safe operating speed of the engine.

5.Snow thrower shave plates and skid shoes are subject to wear and damage. For your safety protection, frequently check all components and replace with original equipment manufacturer’s (OEM) parts only. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

6.Check clutch controls periodically to verify they engage and disengage properly and adjust, if necessary. Refer to the adjustment section in this operator’s manual for instructions.

7.Maintain or replace safety and instruction labels, as necessary.

8.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

9.Prior to storing, run machine a few minutes to clear snow from machine and prevent freeze up of auger/impeller.

10.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer etc.

11.Always refer to the operator’s manual for proper instructions on off-season storage.

WARNING: Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Operator’s Manual Table of Contents Important Safe Operation Practices TrainingMaintenance and Storage Contents of Hardware Pack Boxed Units Assembling Your Snow Thrower UnpackingLoose Parts Boxed Unit CrateAttaching Handle Assembly Assembly Crated UnitAttaching Shift Rod Hardware D Attaching the Chute Assembly Hardware F Attaching Clutch CablesAttaching The Chute Directional Control Know Your Snow Thrower Shift LeverAuger Drive Control Traction ControlOperating Your Snow Thrower To Stop Engine To Engage DriveTo Engage Augers Recoil StarterDrift Cutters If Equipped Chute Clean-Out ToolOperating Tips Making Adjustments Traction Control and Shift LeverChute Assembly Adjusting Shift RodAuger Control Skid ShoesDrive Wheels Maintaining Your Snow ThrowerLubrication Engine Servicing Your Snow ThrowerShave Plate and Skid Shoes Augers Belt Removal and ReplacementAuger Belts Off-Season Storage Friction Wheel RubberDrive Belt Trouble Shooting Guide Trouble Possible Causes Corrective ActionModels 614E, 644E, & 664G Models 614E, 644E, & 664G Part DescriptionModels 614E, 644E, & 664G Jam Lock Nut 3/8-24 Compression Spring 736-0105 Drive Clutch Cable Auger Clutch Wheels Models 614E, 644E, & 664G Models 614E Models 644E & 664G 1615Size Page MANUFACTURER’S Limited Warranty for

664G, 644E specifications

The MTD 644E and 664G tractors represent a significant leap in agricultural technology and efficiency, designed for diverse farming applications. Known for their robust build and advanced features, these models cater to both small and large-scale agricultural operations.

Starting with the MTD 644E, it is powered by a state-of-the-art diesel engine, providing a reliable performance that enhances productivity. The engine delivers impressive horsepower, allowing farmers to tackle various tasks effortlessly. Its fuel efficiency is a standout feature, ensuring reduced operational costs while still meeting demanding farm requirements. The 644E also features a compact design, making it highly maneuverable in tight spaces while maintaining a sturdy construction that guarantees durability in rugged conditions.

On the other hand, the MTD 664G offers slightly higher horsepower, making it suitable for more intensive agricultural work. This model is equipped with a more advanced engine management system that optimizes performance and fuel consumption, ensuring that farmers can work longer hours without frequent refueling. The 664G’s larger frame accommodates additional implements, expanding its versatility for tasks including plowing, tilling, and harvesting.

Both models are built with user-friendly controls, allowing operators to focus on their tasks without unnecessary distractions. The ergonomic seating and intuitive interface are designed to minimize fatigue during long working days. Additionally, these tractors come with a range of safety features, including effective braking systems and visibility enhancements that prioritize operator safety.

Technologically, both the 644E and 664G incorporate precision farming features that allow for better resource management. Implement compatibility enables seamless integration with various agricultural tools, giving users flexibility in their operations. Regular software updates ensure that the tractors remain at the forefront of agricultural technology, further enhancing performance and efficiency.

In summary, the MTD 644E and 664G tractors are tailored for modern farmers seeking reliability and efficiency. Their powerful engines, compact designs, and cutting-edge technology make them indispensable tools on any farm, capable of handling a multitude of agricultural tasks with ease and precision.
Top Page Image Contents