Snapper 522E, SS5220E, ESS5220E manual Safety Rules & Information, Training

Page 6

Safety Rules & Information

This machine is capable to amputating hands and feet and throwing objects. Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to

you, or bystanders, or damage to property or equipment. The triangle in text signifies important cautions or warnings which must be followed.

TRAINING

1.Read, understand, and follow all instructions on the machine and in the manuals before operating this unit. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

2.Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

3.Keep the area of operation clear of all persons, partic- ularly small children and pets.

4.Exercise caution to avoid slipping or falling especially when operating in reverse.

PREPARATION

1.Thoroughly inspect the area where the equipment is to be used and remove all doormat, sleds, boards, wires, and other foreign objects.

2.Disengage all clutches and shift into neutral before starting engine (motor).

3.Do not operate the equipment without wearing ade- quate winter outer garments. Wear footwear that will improve footing on slippery surfaces. Avoid loose fit- ting clothing that can get caught in moving parts.

4.Handle fuel with care; it is highly flammable.

(a)Use an approved fuel container.

(b)Never add fuel to a running engine or hot engine.

(c)Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors. Replace fuel cap securely and wipe up spilled fuel.

(d)Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place con- tainers on the ground, away from your vehicle, before filling.

(e)When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such on a trailer with a portable container, rather than from a gasoline dis- penser nozzle.

(f)Keep nozzle in contact with the rim of the fuel tank or container opening at all times, until refueling is complete. Do not use a nozzle lock-open device.

(g)Replace gasoline cap securely and wipe up spilled fuel.

(h)If fuel is spilled on clothing, change clothing imme- diately.

5.Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

6.Adjust the collector housing height to clear gravel or crushed rock surfaces.

7.Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by the manufacturer).

8.Let engine (motor) and machine adjust to outdoor temperatures before starting to clear snow.

9.Always wear safety glasses or eye shields during operation or while performing an adjustment or repair to protect eye from foreign objects that may be thrown from the machine.

OPERATION

1.Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

2.Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

3.After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect the snowthrower for any damage, and repair the damage before restarting and operating the snowthrower.

4.If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

5.Stop the engine (motor) whenever you leave the operating position, before unclogging the collector/impeller housing or discharge guide, and when making any repairs, adjustments, or inspec- tions.

6.When cleaning, repairing, or inspecting make certain the collector/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent accidental starting.

7.Do not run the engine indoors except for starting the engine or for transporting the snowthrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

8.Exercise extreme caution when operating on slopes. Do not attempt to clear steep slopes.

9.Never operate the snowthrower without proper guards plates, or other safety protective devices in place and working.

10.Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.

11.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

12.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse.

13.Disengage power to the collector/impeller when snowthrower is transported or not in use.

14.Use only attachments and accessories approved by the manufacturer of the snowthrower (such as wheel weights, counterweights, or cabs).

15.Never operate the snowthrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk, never run.

16.Never touch a hot engine or muffler.

17.Never operate the snowthrower near glass enclo- sures, automobiles, window wells, drop-offs, and the like without proper adjustment of the discharge angle.

18.Never direct discharge at bystanders or allow anyone in front of the unit.

19.Never leave a running unit unattended. Always disen- gage the auger and traction controls, stop engine, and remove keys.

20.Do not operate the unit while under the influence of alcohol or drugs.

4

Image 6
Contents OPERATOR’S Manual 522E ModelsPage Table of Contents Safety Rules & Information Operating Safety Safety Rules and Information Moving PartsSafety Rules & Information TrainingSafety Rules ChildrenNorth American Product IdentificationCE Identification TAG Markings ModelsInternational Symbols Safety DecalsRemoval from Carton Assembly ProcedureTools Required SnowthrowerAssembling the Snowthrower EngineControls Operation Snowthrower ControlsControls & Operation Engine & Starting ControlsChecks Before Each START-UP Operational WarningsAdding Engine OIL Adding FuelStarting the Engine Stopping the EngineAfter Each USE Operating the SnowthrowerSnowthrowing Tips OFF-SEASON StorageRegular Maintenance LubricationService Chute Removal InstallationTroubleshooting & Service Cover Removal InstallationReplace Drive Belt Servicing the Spark Plug Servicing Spark PlugAuger Drive Cable Adjustment Specifications Parts & AccessoriesPage O D U C T S

522E, SS5220E, ESS5220E, 522E, 522E, 522E, SS5220E, ESS5220E specifications

The Snapper 522E, SS5220E, and ESS5220E are premium outdoor power equipment designed for both residential and commercial applications. Known for their reliability, robust features, and advanced technology, these models cater to a variety of landscaping needs, ensuring excellent performance and user satisfaction.

The Snapper 522E features a powerful and efficient engine that delivers high torque, allowing it to tackle tough mowing conditions with ease. This model is equipped with a durable steel deck that provides longevity and protection against the wear and tear of regular use. The 522E is designed with a Walk-Behind configuration, giving users greater control during operation, especially in tight spaces or around obstacles.

Similarly, the SS5220E takes the performance of traditional mowers to the next level. It combines an ergonomic design with advanced traction technology, ensuring that users can maneuver effortlessly across different terrains. The SS5220E boasts an electronic start, making it extremely user-friendly, particularly for those who may struggle with pull-start mechanisms. This feature minimizes the hassle involved in starting the machine and allows for quick and efficient mowing.

The ESS5220E introduces innovations that enhance productivity and convenience. It features a spacious grass collection bag, reducing the need for frequent stops to empty clippings. The model also includes adjustable cutting heights, providing versatility for various grass types and user preferences. The robust wheel design ensures smooth movement across uneven lawns, making it ideal for both residential yards and larger commercial properties.

All these models emphasize safety with their design elements, featuring operator presence controls that stop the blade when the user leaves the handle. This provides peace of mind, knowing that the mower will not operate unsafely.

In summary, the Snapper 522E, SS5220E, and ESS5220E stand out in the outdoor power equipment market due to their power, durability, and user-friendly features. Each model offers specific technologies catering to different user needs while maintaining a focus on safety and efficiency. These mowers represent a solid investment for anyone looking to achieve a well-manicured lawn with minimal effort.