Poulan 199434 owner manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

The auger control rod has the short loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.

2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

RUBBER

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER

 

AUGER

CONTROL

RETAINER

CONTROL

ROD

LEVER

SPRING

 

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If neces- sary, rotate chute assembly to align square and pin on un- derside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

ROTATER

 

HEAD

3/8 LOCKNUT

 

3/8 WASHER

CHUTE

BRACKET

PIN

THREADED

STUD

ROTATER HEAD

MOUNTING

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14–17 PSI.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Tool BOX See FigInstall Speed Control ROD See Figs Install Traction Drive Control ROD See FigsInstall Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineHOW to USE Your Snow Thrower StoppingWhen cleaning, repairing, or inspecting, make When traction drive control lever is engagedUsing the CLEAN-OUT Tool See Fig Stopped. Disconnect the spark plug wireBefore Starting the Engine Scraper BARTo Start Engine Snow Throwing Tips Before StoppingIf Recoil Starter has Frozen Maintenance Cleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector To Remove Wheels See Fig Storage OtherTroubleshooting Service Notes Limited Warranty

199434 specifications

The Poulan 199434 is a robust and reliable chainsaw that caters to both professionals and home users alike. Known for its versatility, this model is especially popular among those who require an effective tool for yard maintenance, pruning, and even felling small to medium-sized trees. Its power-packed features and user-friendly design make it a standout option in the chainsaw market.

At the heart of the Poulan 199434 is a strong and efficient 42cc engine, which delivers a commendable power-to-weight ratio. This allows for quick and efficient cutting operations, whether you're trimming branches or tackling larger logs. The engine utilizes a two-cycle design, which not only enhances performance but also ensures lower emissions, making it more environmentally friendly.

One of the remarkable features of the Poulan 199434 is its easy-to-access air filter. This vital component helps maintain optimal engine performance by allowing users to conveniently clean or replace the filter. Additionally, the chainsaw comes equipped with an automatic chain oiler that delivers lubrication as needed, reducing friction and extending the life of both the chain and the bar.

The chainsaw's 18-inch bar is a perfect size for handling various cutting tasks, providing excellent reach without sacrificing control. The chain itself is designed for durability and efficiency, ensuring smooth cutting with minimal kickback. Users will also appreciate the chainsaw's lightweight build, which reduces fatigue during extended use, making it easier to handle for both novice and experienced operators.

Safety features are another priority for the Poulan 199434. The chainsaw includes a hand guard that provides protection against flying debris, as well as a chain brake that can stop the chain quickly in case of kickback. These safety mechanisms instill confidence in users, allowing them to operate the chainsaw with peace of mind.

In summary, the Poulan 199434 is a feature-rich chainsaw that balances power, efficiency, and safety. Its high-performing engine, user-friendly maintenance features, and emphasis on safety make it a practical choice for a variety of woodworking tasks. Whether you're a homeowner needing to manage your landscaping or a professional tackling routine jobs, the Poulan 199434 is an exceptional tool designed to meet your needs.
Top Page Image Contents