Tctctctc

INSTRUCTIONS

8.050

In playing mode, short press OSO on remote control to show all information of present disc.

9. Number Buttons

In VCO mode, press 0-9 number button to input song. For example, you want to choose 13th song, press 10+ button, and then press 3 button once to play 13th song.

Note: This function can only be worked by the remote control.

10. Repeat Play

In playing mode, press AMS/RPT button on remote control, to startup following, repeat function . Single song repeat--. Repeat playoff.

Note:

1)When playing VCO disc, if PBC is on, no repeat function .

2)After unit is power off or mode is switched to other playing mode except VCO mode . if you switch back to VCO mode, repeat playing will be cancelled .

11. Randomly Play

In VCO mode, press LOC/RDM button on remote control, to instantly play each song . Press again to back to the normal play.

Note: When VCO disc, if PBC is on , ROM will not work.

12. Switch Track

In VCO mode, press AUDIO button on remote control to switch track as following

sequence: Left - Right Stereo

13.OPEN

Press OPEN button on panel to eject disc.

INSTRUCTIONS

14. PBC (MENU) Play

In VCO mode, press this button then play the PBC and display will show whole menu in disc, work with number button to choose song. When you are playing either song of the PBC, and you want to stop to select another song, press the button to turn off. Note:

1)This function can be worked by the control.

2)PBC is suitable for the SVCO and VCO 2.0 disc.

3)In PBC mode, you can not press number button only to choose song .

15. VCO Program Playing

In VCO mode, you can set playing sequence of songs by program play function. The program playing operation steps are as follows:

In VCO mode, press ST/PTOG button , display will show:

PROG

		5			9 - -	- -	13
2 - -	- -	6 - -	-	-	10 - -	- -	14		- -
3		7 - -	-	-	11		15	- -	- -
4 - -	- -	8			12		16 - -		- -
		PLAY			DELETE

Input the songs which you want to programmed by the number buttons on remote control. For example: Program the first song, input your desires song, for example, the fourth song, and press number button 4 on the remote control. Program the second song, press T button move the cursor to 2____ . Input your desired song, for example, the eighth song,

press number button 8 on the remote control. Press ~I button to program play. Back to the normal mode, press the ST/PROG button, then press ~I button .

Note: This function can only be worked by the remote control.