INSTRUCTIONS
Contact book mode switching
You can touch this button under the Bluetooth mode to select the next mode.
Touch this function key to search the dialed numbers. Each time this key is touched, the cursor will move to the next dialed number.
Touch this function key to search the received numbers. Each time this key is touched, the cursor will move to the next received number.
Touch this function key to search the missed numbers. Each time this key is touched, the cursor will move to the next missed number.
Operations and Settings for the Bluetooth Function
1.Features of the Bluetooth function
1)You can use the function buttons on the unit to receive a call or dial a phone number.
2)You can directly use the
3)You can use the
4)You can switch between the Bluetooth
5)You can use your voice to dial a new number (valid only for cell phones with voice dialing function) .
6)With the Bluetooth function, you can use the Bluetooth microphone in the car to talk with your folks and friends without having to hold your cell phone, so that your hands are dedicated for driving, which is safer and
2.Bluetooth match conditions
You can shortly touch the Bluetooth function key _ under the main menu to directly access the Blueetooth interface.
With a cell phone that supports the function of Blueetooth wireless connection, you can establish a connection between your cell phone and the
3.Matching and connections between the cell phone and the Bluetooth of the unit Set your cell phone to the Bluetooth mode, and use the cell phone to search equipments. After the Bluetooth equipment of the unit is searched, the cell phone will ask you for the Bluetooth password. Press the unit matching setup button ..!!:!.. , and enter the Bluetooth password (0000) and confirm it, and then the cell phone will ask you whether you authorize the connection with this equipment or not. Please select "YES", and the cell phone will be automatically connected with the said Bluetooth equipment within 30 seconds. "OK LINK" will be displayed on the Bluetooth interface to show that a connection between the cell phone and the Bluetooth device has been successfully established. Under and mode (radio, TV, OVO, etc.), if there is an incoming call to your cell phone which has been stably connected to the Bluetooth device of the unit, the unit will switch from other mode to the Bluetooth mode after the cell phone rings for about 10 seconds. Current mode will be automatically restored after
38
INSTRUCTIONS
20.0THER PLAY MODE
AUXIN:
AUX IN OPERATION
1)Press "Source" button on remote control or touch "AUX" on the touch screen, to switch to AUX mode.
2)This will allow you to listen and or watch any source that you have plugged into this section of the radio.
3)This unit has 1 - Video RCA input & 1 pair of Audio RCA's for this feature.
CCD (Back-Up Camera)
1)If there is a
2)When you are backing up the car there you will see this image [TIl on your screen.
3)You can set CCO image according to your car's own position in general setting mode.
39