Poulan 192034 owner manual HOW to USE Your Snow Thrower, Stopping

Page 10

OPERATION

The operation of any snow thrower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear

safety glasses or eye shields while operating your snow thrower or performing any adjust- ments or repairs. We recommend standard safety glasses

or a wide vision safety mask worn over spectacles.

TO USE CHOKE CONTROL (See Fig. 11)

The choke control is located on the engine. Use the choke control whenever you are starting a cold engine. Do not use to start a warm engine.

•To engage choke, turn knob clockwise. Slowly turn knob counterclockwise to disengage.

HOW TO USE YOUR SNOW THROWER

Know how to operate all controls before adding fuel or attempting to start the engine.

STOPPING

TRACTION DRIVE

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

OFFFULL

AUGER

•Release the auger control lever to stop throwing snow.

ENGINE

1.Move throttle control to “STOP” position.

2.Remove (do not turn) safety ignition key to prevent unauthorized use.

NOTE: Never use choke to stop engine.

TO USE FUEL SHUT-OFF VALVE (See Fig. 9)

The fuel shut-off valve is located beneath the fuel tank on the engine. Always operate the snow thrower with the fuel shut-off valve in the OPEN position.

OFF

OPEN

FIG. 9

TO USE THROTTLE CONTROL (See Fig. 10)

The throttle control is located on the engine.Always operate the snow thrower with the engine at full throttle. Full throttle offers the best snow thrower performance.

FAST

SLOW

FIG. 10

FIG. 11

TO CONTROL SNOW DISCHARGE (See Figs. 12 & 13)

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

WARNING: If the discharge chute or au- ger become clogged, shut-off engine and wait for all moving parts to stop.Use the clean-out tool, NOT YOUR HANDS, to unclog the chute and/or auger.

The DIRECTION in which snow is to be thrown is controlled by the discharge chute control lever.

•To change the discharge chute position, press down- ward on discharge chute control lever and move lever left or right until chute is in desired position. Be sure lever springs back and locks into desired position.

DISCHARGE CHUTE

CONTROL LEVER

FIG. 12

The DISTANCE that snow is thrown is controlled by the position of the chute defl ector. Set the defl ector low to throw snow a short distance; set the defl ector higher to throw snow farther.

•To change the deflector position, loosen knob, move de-

10

flector to desired position and tighten knob securely.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model Number Snow ThrowerOperation TrainingPreparation Static Electricity HazardMaintenance and Storage API SG-SL14-15 Service and AdjustmentsParts Packed Separately in Carton 16-18Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Unfold Upper HandleInstall Traction Drive Control ROD See Figs Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotater Head See Fig Check Tire PressureOperation Know Your Snow ThrowerMeets A.N.S.I. Safety Requirements HOW to USE Your Snow Thrower StoppingTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigTo Move Forward and Backward See Fig Check Engine OIL Level See Fig To Adjust Skid Plates See FigBefore Starting the Engine ADD Gasoline See FigBefore Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenBefore Each USE MaintenanceGeneral Recommendations LubricationCleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Storage OtherTroubleshooting Limited Warranty

192034 specifications

The Poulan 192034 is a versatile and high-performing chainsaw that caters to both professional users and homeowners looking for a reliable tool for various cutting tasks. Designed for durability and efficiency, the Poulan 192034 excels in handling both light and heavy-duty applications. One of its standout features is its powerful engine, which ensures optimal cutting performance even in tough conditions.

Equipped with a 38cc two-stroke engine, the Poulan 192034 delivers impressive power, allowing users to tackle everything from tree trimming to firewood cutting. The engine is designed to provide a good balance of torque and speed, enabling users to make quick work of dense materials. Furthermore, the chainsaw comes with a 16-inch bar, offering a perfect size for both residential and commercial cutting needs, making it ideal for various applications including pruning, felling small trees, and cutting logs.

One of the remarkable technologies employed in the Poulan 192034 is the Easy Start system, which significantly reduces the effort required to start the chainsaw. This innovative feature allows users to get to work quickly without the frustration often associated with starting gas-powered tools. In addition to Easy Start, the chainsaw is equipped with an automatic oiling system that ensures the chain and bar receive the necessary lubrication during operation, minimizing wear and prolonging the life of these critical components.

User comfort is also a key focus in the design of the Poulan 192034. The chainsaw features a lightweight and ergonomic design that reduces user fatigue during extended use. The anti-vibration technology incorporated into the handle absorbs shocks, making it easier to handle the tool for longer periods without discomfort. This is particularly valuable for professionals who may be using the chainsaw for multiple hours at a time.

Another advantage of the Poulan 192034 is its safety features, including a chain brake that engages quickly in the event of kickback, protecting the user from potential injuries. The easy-access air filter and tool-less chain tensioning system enhance convenience, allowing users to maintain the chainsaw effortlessly.

Overall, the Poulan 192034 stands out as a reliable, efficient, and user-friendly chainsaw equipped with essential features and technologies that meet the needs of both casual users and professionals alike. With its solid performance and thoughtful design, it is a valuable addition to any toolkit.
Top Page Image Contents