Poulan 192034 owner manual Maintenance and Storage, Api Sg-Sl

Page 3

•Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening and front auger area at all times.

•Exercise extreme caution when operating on or cross- ing gravel drives, walks or roads. Stay alert for hidden hazards or traffic.

•After striking a foreign object, stop the engine (motor), remove wire from the spark plug, thoroughly inspect snow thrower for any damage, and repair the damage before restarting and operating the snow thrower.

•If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

•Stop the engine (motor) whenever you leave the oper- ating position, before unclogging the auger/impeller housing or discharge chute and when making any repairs, adjustments, or inspections.

•When cleaning, repairing, or inspecting, make certain all controls are disengaged and the auger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent accidental starting.

•Take all possible precautions when leaving the snow thrower unattended.Disengage the auger/impeller, stop engine (motor), and remove key.

•Do not run the engine (motor) indoors, except when starting the engine (motor) and for transporting the snow thrower in or out of the building. Open the outside doors.

WARNING: Exhaust fumes are dan- gerous (containing CARBON MONOX- IDE, an ODORLESS and DEADLY GAS).

•Do not clear snow across the face of slopes. Exercise extreme caution when changing direction on slopes. Do not attempt to clear steep slopes.

•Never operate the snow thrower without proper guards, plates or other safety protective devices in place.

•Never operate the snow thrower near glass enclo- sures, automobiles, window wells, drop–offs, and the like without proper adjustment of the snow discharge angle. Keep children and pets away.

•Do not overload the machine capacity by attempting to clear snow at too fast a rate.

•Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when backing up.

•Never direct discharge at bystanders or allow anyone in front of the unit.

•Disengage power to the auger/impeller when snow thrower is transported or not in use.

•Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, cabs, tire chains, electric start kits, etc.).

•Never operate the snow thrower without good visibility or light. Always be sure of your footing and keep a fi rm hold on the handles. Walk; never run.

•Do not overreach. Keep proper footing and balance at all times.

•This snow thrower is for use on sidewalks, driveways and other ground level surfaces.

•Do not use the snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings.

MAINTENANCE AND STORAGE

•Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

•Never store the snow thrower with fuel in the tank inside a building where ignition sources are present such as hot water and space heaters, clothes dryers, and the like. Allow the engine (motor) to cool before storing in any enclosure.

•Always refer to operator’s guide instructions for im- portant details if the snow thrower is to be stored for an extended period.

•Maintain or replace safety and instruction labels, as necessary.

•Run the snow thrower, with auger engaged, a few minutes after throwing snow to clear the machine and prevent freeze-up of the auger/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. It has been designed, engineered and manufactured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center/department. We have competent, well-trained tech- nicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODEL AND SERIAL NUMBERSWILL BE FOUND ON A DECAL ATTACHEDTOTHE REAR OFTHE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE

FOR FUTURE REFERENCE.

3

PRODUCT SPECIFICATIONS

Gasoline Capacity

2.0 Quarts

and Type:

Unleaded Regular only

 

 

Oil Type

SAE 30 (above 40°F)

(API SG–SL):

SAE 5W-30 or 10W-30 (0° to +40°F)

 

SAE 0W-30 (below 0°F)

 

 

Oil Capacity:

21 Ounces

 

 

Spark Plug:

Champion RN4C (Gap: .030")

 

 

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your snow thrower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Snow Thrower Model NumberStatic Electricity Hazard TrainingPreparation OperationAPI SG-SL Maintenance and Storage16-18 Service and AdjustmentsParts Packed Separately in Carton 14-15Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsCheck Tire Pressure Install Discharge Chute / Chute Rotater Head See FigKnow Your Snow Thrower OperationMeets A.N.S.I. Safety Requirements Stopping HOW to USE Your Snow ThrowerUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig ADD Gasoline See Fig To Adjust Skid Plates See FigBefore Starting the Engine Check Engine OIL Level See FigIf Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingLubrication MaintenanceGeneral Recommendations Before Each USEEngine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Other StorageTroubleshooting Limited Warranty

192034 specifications

The Poulan 192034 is a versatile and high-performing chainsaw that caters to both professional users and homeowners looking for a reliable tool for various cutting tasks. Designed for durability and efficiency, the Poulan 192034 excels in handling both light and heavy-duty applications. One of its standout features is its powerful engine, which ensures optimal cutting performance even in tough conditions.

Equipped with a 38cc two-stroke engine, the Poulan 192034 delivers impressive power, allowing users to tackle everything from tree trimming to firewood cutting. The engine is designed to provide a good balance of torque and speed, enabling users to make quick work of dense materials. Furthermore, the chainsaw comes with a 16-inch bar, offering a perfect size for both residential and commercial cutting needs, making it ideal for various applications including pruning, felling small trees, and cutting logs.

One of the remarkable technologies employed in the Poulan 192034 is the Easy Start system, which significantly reduces the effort required to start the chainsaw. This innovative feature allows users to get to work quickly without the frustration often associated with starting gas-powered tools. In addition to Easy Start, the chainsaw is equipped with an automatic oiling system that ensures the chain and bar receive the necessary lubrication during operation, minimizing wear and prolonging the life of these critical components.

User comfort is also a key focus in the design of the Poulan 192034. The chainsaw features a lightweight and ergonomic design that reduces user fatigue during extended use. The anti-vibration technology incorporated into the handle absorbs shocks, making it easier to handle the tool for longer periods without discomfort. This is particularly valuable for professionals who may be using the chainsaw for multiple hours at a time.

Another advantage of the Poulan 192034 is its safety features, including a chain brake that engages quickly in the event of kickback, protecting the user from potential injuries. The easy-access air filter and tool-less chain tensioning system enhance convenience, allowing users to maintain the chainsaw effortlessly.

Overall, the Poulan 192034 stands out as a reliable, efficient, and user-friendly chainsaw equipped with essential features and technologies that meet the needs of both casual users and professionals alike. With its solid performance and thoughtful design, it is a valuable addition to any toolkit.
Top Page Image Contents