Stanley Black & Decker 36SS, 30SS, 45SS owner manual Drift Cutters if desired, Skid Shoes, Headlight

Page 18

Assembly Instructions

30SS, 36SS, 45SS

Step 8: Drift Cutters (if desired)

1.The drift cutters are attached to the main housing in the stored position.

2.Remove the two bolts on each drift cutter.

3.Reattach the drift cutters in the operating position.

4.Replace bolts and secure tightly.

Step 9: Skid Shoes

1.Skid shoes are stored in the hardware bag for shipping.

2.Remove from hardware bag, and install skid shoes using the provided fasteners

3.Insert the fasteners so the flat head of the carriage bolt is on the outside of the main housing.

CAUTION: Check the skids to ensure that the auger does not contact the paved or gravel surface. Adjust skids as necessary to make up for wear on the snow blower.

1.Check the tire pressure to ensure the tires are properly inflated.

2.Move skid shoes up and down to the desired position based on the surface texture.

￿￿If the surface is rougher adjust the skid shoes lower.

￿￿If the surfaces is smoother adjust the skid shoes higher. Firmly tighten the nuts that secure both skids to the auger sides.

Step 10: Headlight

1.Attach the upper set of handlebars with the control panel mounted.

2.Connect the headlight cable to the plastic connecter that is coming from the snow blower.

3.Insert headlight by clipping top tabs under the control panel and squeezing base to snap housing into place.

DANGER: GASOLINE IS HIGHLY FLAMMABLE AND EXPLOSIVE. Do not add fuel while the engine is running or is hot. Keep open flames, sparks, and heat away from the fuel and store fuel in containers specifically designed for that purpose. ADD FUEL

OUTDOORS ONLY. IF THE FUEL IS SPILLED, DO NOT START THE ENGINE. Manually push the snow blower away from the spill and wipe up immediately.

Step 11: Filling Oil and Gasoline

1.Fill the engine with SAE 5W-30 engine oil. Fill the engine with 1.2 to 1.5 quarts of oil. Fill up to the full level mark on the dip stick.

2.Check that the fuel filter is clean and fill the tank with unleaded gasoline.

Rev: 12/21/2011

Need Help With Assembly?

1-919-550-3221 ext. 158

13

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Do not Return this Snow Blower to Store 30SS, 36SS, 45SS Remain with the snow blower if resoldCommercial Walk Behind Mowers Brush MowerZero-Turn Commercial Mowers Tow Behind MowerGenerator Cord Accessories Electric Pressure WasherContents Safety Information and Warnings Preparation Safety Precautions Preparation-Safety PrecautionsGasoline and other fuels-Safety Precautions Operation Safety Precautions Equipment Operation-Safety PrecautionsClearing a Clogged Chute-Safety Precautions Shut the Engine OFFSafety Decals Safety Decal IdentificationProduct Specifications Models FeatureDischarge Chute Direction Control Panel and Snow Blower ComponentsControl Panel Snow Blower Component IdentificationPlease indicate the part that you are missing CommentsDirectional Discharge Chute Assembly InstructionsControl Panel Handles Chute CrankChute Rotation Cable Connection Chute Direction Control Cable Support Drive Control Augers/Impeller ControlHeadlight Drift Cutters if desiredSkid Shoes Filling Oil and GasolineStarting the Engine Using the Recoil Start Starting the EngineEngage Transmission Drive Operating InstructionsTransmission Control To Stop EngineChute Direction Control Never use your hands to clean a clogged chute or openingClean Out Tool HeadlightsUsing your Stanley Snow Blower Stanley Snow Blower uses a live axle which meansGeneral Maintenance Time Interval Break-in ProcedureCleaning the Snow blower First 5 hrs Daily Weekly Bi-weekly MonthlyAdjusting Drive Cable Service AdjustmentsAdjusting Augers/Impeller Cable Adjusting Shift RodCheck & Replacing the Transmission Drive Belt If the friction wheel needs to be replaced for any reason Adjusting Discharge DeflectorChanging Friction Wheel Part# B05311Storage Instructions Short Term StorageExtended Storage Problem Possible Causes Solution Electric starterTroubleshooting Replacement Parts OEM Replacement PartsParts Diagram Collector Housing Assembly ReferenceParts Diagram Limited Warranty & Service To Qualify for this Warranty

45SS, 30SS, 36SS specifications

Stanley Black & Decker is synonymous with innovation in the tool industry, and their 36SS, 30SS, and 45SS models exemplify this commitment to excellence. These products are engineered to meet both professional and DIY needs, with a robust set of features, advanced technologies, and user-friendly characteristics.

The 36SS model stands out with its powerful motor, designed to handle even the toughest tasks with ease. This tool features a high-efficiency motor that provides a higher output while consuming less energy, making it both effective and eco-friendly. The ergonomic design allows for comfortable handling over extended periods, reducing user fatigue. It also features a variable speed control that allows users to adjust the speed according to the task at hand, providing versatility in application.

Moving on to the 30SS, this model offers compactness without sacrificing performance. It is particularly popular for its lightweight design, making it an ideal choice for users who need portability without compromising on power. The 30SS is equipped with advanced technology that includes an integrated battery management system, ensuring longer run times and optimal battery life. Its durability is enhanced by a rugged exterior that withstands harsh job site conditions, adding to its reliability.

The 45SS takes functionality to the next level by incorporating smart technology. This model features Bluetooth connectivity, allowing it to pair with mobile devices for real-time monitoring and performance tracking. Users can access data such as battery usage, maintenance reminders, and even customizable settings straight from their smartphones. Additionally, the 45SS showcases a user-friendly interface with intuitive controls, making it accessible for users of all skill levels.

All three models, the 36SS, 30SS, and 45SS, are characterized by their commitment to safety. Each tool is equipped with multiple safety features such as overload protection, anti-vibration systems, and enhanced grip designs to prevent slippage during use.

Stanley Black & Decker's focus on durability, performance, and user experience makes the 36SS, 30SS, and 45SS tools exemplary choices for both professionals and DIY enthusiasts. These models represent a perfect blend of power, innovation, and practicality, ensuring that users can tackle any project with confidence.
Top Page Image Contents