Troy-Bilt 772C0781 warranty Standard Skid Shoe, Reversible Skid Shoe

Page 15

2.With the drive control released, there must be 1/8” clearance between the friction wheel and the drive pulley in all positions of the shift lever.

3.With the drive control engaged, the friction wheel must contact the drive pulley. Refer to Figure 28 on page 18.

4.If adjustment is necessary, loosen the lower hex nut on the drive cable index bracket and pivot the bracket upward or downward as necessary. Refer to Figure 15. Tighten the lower hex nut to secure the bracket when correct adjustment is reached.

5.Reassemble the frame cover and turn the unit back to its operating position.

NOTE: If you placed plastic under the gas cap, be certain to remove it now.

Skid Shoes

The space between this shave plate and the ground can be adjusted. For close snow removal, place skid shoes in the low position. Use middle or high position when area to be cleared is uneven.

1.Adjust skid shoes by loosening the four lock nuts and carriage bolts and moving skid shoes to desired position. See Figure 16A or 16B.

2.Make certain the entire bottom surface of skid shoes are against the ground to avoid uneven wear on the skid shoes.

3.Tighten nuts and bolts securely.

NOTE: Some models are equipped with reversible skid shoes and may be turned over to increase their lifespan. See Figure 16B.

Auger Control

To adjust the auger control, refer to page 13.

Figure 16A - Standard Skid Shoe

Figure 16B - Reversible Skid Shoe

5

Making

Adjustments

IMPORTANT

It is not recommended that you operate this snow thrower on gravel as loose gravel can be easily picked up and thrown by the auger causing personal injury or damage to the snow thrower.

If for some reason, you have to operate the snow thrower on gravel, keep the skid shoe in the highest position for maximum clearance between the ground and the shave plate.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 772C0781 2005 OPERATOR’S ManualTable of Contents Your Responsibility Restrict the use Chute Clean-out ToolSafe Operation Do not modify engine OperationLower handle Setting Up Your Snow ThrowerRecommendations Pivoting handle upwardShear Pin Storage optional Prior to operatingTest on Instructions careAll models Drift Cutters If EquippedTire Pressure Pneumatic Tires Clean-Out ToolClean-Out Tool Skid ShoesOperating Your Snow Thrower Wheel Steering Controls Auger ControlDrive Control/ Auger Control Lock Four-Way Chute ControlRecoil Starter Electric Starter If EquippedStarting The Engine Electric StarterAuger Control Test Recoil StarterShift Cable Chute ControlDrive Control & Shift Lever Reversible Skid Shoe Standard Skid ShoeMaintaining Your Snow Thrower LubricationShave Plate and Skid Shoes Auger Belt Replacement Always stop engine, disconnect spark Drive Belt ReplacementMaintenance or adjustments on your machine AugersFriction Wheel Removal Wipe equipment with an oiled rag to prevent rust Off-Season StorageTrouble Shooting TWO Year Supreme Warranty

772C0781 specifications

The Troy-Bilt 772C0781 is a robust and versatile push lawn mower designed to meet the demands of homeowners seeking an efficient lawn care solution. This model combines power, precision, and ease of use, making it a favorite among gardening enthusiasts.

One of the standout features of the Troy-Bilt 772C0781 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, it provides the necessary torque and performance to tackle various lawn conditions. The engine’s dependable performance ensures that the mower can efficiently handle both thick grass and uneven terrain, granting users the ability to maintain their lawns with ease.

The cutting deck on the Troy-Bilt 772C0781 is designed for optimal performance. With a 21-inch steel cutting deck, this mower provides a wide cutting path, allowing users to cover more ground in fewer passes. Additionally, the deck features a versatile three-in-one cutting system, enabling users to choose between mulching, rear bagging, or side discharge options. This versatility empowers homeowners to adapt to different lawn care needs throughout the seasons.

User comfort and control are significantly enhanced by the adjustable height feature. The mower allows for six different cutting height positions, ranging from 1.25 inches to 3.75 inches. This customization helps users achieve the desired look for their lawns while promoting healthy grass growth. Furthermore, the ergonomic handle design is equipped with cushioned grips, reducing fatigue during extended mowing sessions and enhancing the overall mowing experience.

Another impressive aspect of the Troy-Bilt 772C0781 is its ease of maintenance. The mower features an easy-to-access oil fill and a simple blade height adjustment mechanism, making routine upkeep straightforward for users. This focus on user-friendly design extends to its overall construction, with a durable steel frame designed to withstand the rigors of regular lawn maintenance.

In conclusion, the Troy-Bilt 772C0781 stands out as a powerful and versatile lawn mower equipped with essential features and technologies designed for user convenience. Whether tackling a small yard or a more substantial lawn, this mower provides the performance, comfort, and customization that every homeowner looks for, ensuring a well-manicured lawn all season long.
Top Page Image Contents