Troy-Bilt 10030 manual Operator’s Manual

Page 1

Operator’s Manual

Snow Thrower

Model 10030

IMPORTANT: Read safety rules and instructions carefully before operating equipment.

Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest- covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.

TROY-BILT LLC. P.O. BOX 361131 CLEVELAND, OHIO 44136-0019

PRINTED IN U.S.A.

FORM NO. 769-00376.fm

 

(6/2002)

Image 1
Contents Operator’s Manual Table of Contents Training Important Safe Operation PracticesPreparation OperationYour Responsibility Maintenance & StorageAssembling Your Snow Thrower Final Adjustments Chute Clean-Out ToolTraction Control & Shift Lever Auger ControlTire Pressure Pneumatic Tires Knowing Your Snow ThrowerChute Clean-Out Tool Safety Ignition KeyHeated Grips Switch Traction Control / Auger Control LockBefore Starting Operating Your Snow ThrowerGas & Oil Fill-Up To Start EngineTo Engage Augers To Engage Wheel DriveOperating Tips Shift Rod Making AdjustmentsTraction Control Skid Shoe Chute AssemblyDrive Wheels Auger ControlGeneral Recommendations Maintaining Your Snow ThrowerLubrication Drive Belts Friction Wheel RubberCarburetor Augers Servicing Your Snow ThrowerShave Plate and Skid Shoes Replacing BeltsDrive Belt Changing Friction Wheel RubberOFF-SEASON Storage EngineProblem Cause Remedy TroubleshootingSafety & Decorative Labels Parts List for Model Model Model 710-1652 Connector Plugs to Harness Assembly13 -3068 Lock Nut 5/16-18 714-0104 Supplied Description Hex AB Screw 1/4-14 x MANUFACTURER’S Limited Warranty for