Troy-Bilt 10030 manual Table of Contents

Page 2

 

TABLE OF CONTENTS

Content

Page

Important Safe Operation Practices

...................................................................................3

Assembling Your Snow Thrower

5

Know Your Snow Thrower

7

Operating Your Snow Thrower

9

Making Adjustments

11

Maintaining Your Snow Thrower

13

Servicing Your Snow Thrower

15

Off-Season Storage

17

Troubleshooting

18

Parts List

20

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new snow thrower. It will help you to assemble, prepare and maintain the unit for best performance. Please read and understand what it says.

Before you start assembling your new snow thrower, please locate the model plate on the equipment and copy the information from it in the space provided below. The information on the model plate is very important if you need help from our Customer Support Department or an authorized dealer.

You can locate the model number by standing behind the unit in the operating position and looking down at the dash panel . A sample model plate is explained below. For future reference, please copy the model number and the serial number of the equipment in the space below.

 

Copy the model number here:

TROY-BILT LLC

Copy the serial number here:

P. O. BOX 3 6 1 1 3 1

www.troybilt.com CLEVELAND, OH 44136

 

330-558-7220

 

866-840-6483

 

ENGINE INFORMATION

The engine manufacturer is responsible for all engine-related issues with regards to performance, power-rating, specifications, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual packed separately with your unit for more information.

CALLING CUSTOMER SUPPORT

Please do NOT return the unit to the retailer from which it was purchased, without first contacting Customer Support.

If you have difficulty assembling this product or have any questions regarding the controls, operation or maintenance of this unit, please call 1-866-840-6483or 1-330-558-7220to reach a Customer Support representative. Please have your unit’s model number and serial number ready when you call. See previous section to locate this information. You will be asked to enter the serial number in order to process your call.

For more details about your unit, visit our website at www.troybilt.com

2

Image 2
Contents Operator’s Manual Table of Contents Preparation Important Safe Operation PracticesTraining OperationMaintenance & Storage Your ResponsibilityAssembling Your Snow Thrower Traction Control & Shift Lever Chute Clean-Out ToolFinal Adjustments Auger ControlKnowing Your Snow Thrower Tire Pressure Pneumatic TiresHeated Grips Switch Safety Ignition KeyChute Clean-Out Tool Traction Control / Auger Control LockGas & Oil Fill-Up Operating Your Snow ThrowerBefore Starting To Start EngineOperating Tips To Engage Wheel DriveTo Engage Augers Traction Control Making AdjustmentsShift Rod Drive Wheels Chute AssemblySkid Shoe Auger ControlLubrication Maintaining Your Snow ThrowerGeneral Recommendations Carburetor Friction Wheel RubberDrive Belts Shave Plate and Skid Shoes Servicing Your Snow ThrowerAugers Replacing BeltsChanging Friction Wheel Rubber Drive BeltEngine OFF-SEASON StorageTroubleshooting Problem Cause RemedySafety & Decorative Labels Parts List for Model Model Model 710-1652 Harness Assembly Connector Plugs to13 -3068 Lock Nut 5/16-18 714-0104 Supplied Description Hex AB Screw 1/4-14 x MANUFACTURER’S Limited Warranty for