White Outdoor 769-01923A warranty Gas & Oil Fill-Up, Starting The Engine, Stopping The Engine

Page 10

WARNING

Read, understand, and follow all instruc- tions and warnings on the machine and in this manual before operating.

Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel the machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes and other sources of ignition.

If your home’s wir- ing system is not a three-wire grounded system, do not use this electric starter under any conditions.

If your home electrical system is grounded, but a three-hole receptacle is not available, do not use your snow thrower’s electric starter.

Gas & Oil Fill-Up

Service the engine with gasoline and oil as instructed in the Tecumseh Engines manual packed separately with your snow thrower. Read instructions carefully.

Starting The Engine

1.Attach spark plug wire to spark plug. Make certain the metal loop on the end of the spark plug wire (inside the rubber boot) is fastened securely over the metal tip on the spark plug.

2.Make certain both the auger control and drive control are in the disengaged (released) position.

3.Move throttle control up to FAST position. Insert ignition key into slot. Make sure it snaps into place. Do not attempt to turn the key.

NOTE: The engine cannot start unless the key is inserted into ignition switch.

Electric Starter

1.Determine that your home’s wiring is a three-wire grounded system. Ask a licensed electrician if you are not certain.

WARNING: The optional electric starter is equipped with a grounded three-wire power cord and plug, and is designed to op- erate on 120 volt AC household current. It must be used with a properly grounded three-prong receptacle at all times to avoid the possibility of electric shock. Follow all instructions carefully prior to operating the electric starter.

If you have a grounded three-prong receptacle, proceed as follows:

1.Plug the extension cord into the outlet located on the engine’s surface. Plug the other end of extension cord into a three-prong 120-volt, grounded, AC outlet in a well-ventilated area.

2.Rotate choke control to FULL choke position (for a cold engine start).

NOTE: If the engine is already warm, place choke control in the OFF position instead of FULL.

3.Push the primer two or three times for cold engine start, making sure to cover vent hole in the center of the primer when pushing.

NOTE: DO NOT use primer to restart a warm engine after a short shutdown.

4.Push starter button to start engine.

5.Once the engine starts, immediately release starter button.

6.As the engine warms, slowly rotate the choke control to the OFF position. If the engine falters, quickly rotate the choke control back to FULL and then slowly into the OFF position again.

7.When disconnecting the extension cord, always unplug the end at the three-prong wall outlet before unplug- ging the opposite end from the snow thrower.

Recoil Starter

1.Rotate choke control to FULL choke position (cold engine start).

NOTE: If the engine is already warm, place choke control in the OFF position instead of FULL.

2.Push the primer two or three times for cold engine start, making sure to cover vent hole in the center of the primer when pushing.

NOTE: DO NOT use primer to restart a warm engine after a short shutdown.

NOTE: Additional priming may be necessary if the temperature is below 15° Fahrenheit.

3.Grasp the recoil starter handle and slowly pull the rope out. At the point where it becomes slightly harder to pull the rope, slowly allow the rope to recoil.

4.Pull the starter handle with a firm, rapid stroke. Do not release the handle and allow it to snap back. Keep a firm hold on the starter handle and allow it to slowly recoil.

5.As the engine warms, slowly rotate the choke control to the OFF position. If the engine falters, quickly rotate the choke control back to the FULL position and then slowly into the OFF position again.

NOTE: Allow the engine to warm up for a few minutes after starting. The engine will not develop full power until it reaches operating temperatures.

Stopping The Engine

Run engine for a few minutes before stopping to help dry off any moisture on the engine.

1.Move throttle control to STOP position.

2.Remove the ignition key.

NOTE: Keep the key in a safe place. The engine cannot start without the ignition key.

3.Wipe all snow and moisture from the area around the engine as well as the area in and around the drive control and auger control. Also, engage and release both controls several times.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Two-Stage Snow Thrower H-Style MTD LLC, P.O. BOX 361131 CLEVELAND, OhioFinding and Recording Model Number Table of ContentsCustomer Support %, 352&!#%3 Your Responsibility53% %842! #!54/ %. /0%2!4  2%!$ /0%2!4/2g3 -!.5!,TrainingPreparation Your Responsibility Restrict the useDo not modify engine Maintenance & StorageOperation Your ResponsibilitySetting Up Your Snow Thrower Position the chute assembly over the baseTire Pressure Auger ControlSkid Shoes Chute directional controlOperating Your Snow Thrower Know Your Snow Thrower$26% #/.42 Stopping The Engine Gas & Oil Fill-UpStarting The Engine Electric StarterTo Engage Augers Chute Clean-Out ToolTo Engage Drive Auger Control TestMaking Adjustments Shift CableChute Bracket Adjustment Drive ControlLubrication Maintaining Your Snow ThrowerEngine Shave Plate and Skid ShoesAuger Belt Replacement Drive Belt Replacement Friction Wheel Removal Preparing Snow Thrower Off-Season StoragePreparing Engine Short-Term StorageTrouble Shooting Problem Cause RemedyStyle H Illustrated Parts List To order replacement Parts, call Or visit us on Web atStyle H Handle Assembly, Lock, LH 17 9 684-04153 Page Page MANUFACTURER’S Limited Warranty for MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio 44136-0019 Phone

769-01923A specifications

The White Outdoor 769-01923A is a versatile and efficient piece of equipment designed for outdoor tasks, particularly in landscaping and gardening. This machine embodies a combination of power, durability, and user-friendly features, making it a top choice among both amateur gardeners and professional landscapers.

One of the standout features of the 769-01923A is its robust engine. Powered by a high-performance gas engine, this equipment offers ample power to tackle a variety of yard work, from mowing to trimming. The engine is designed to provide reliable performance, ensuring that users can complete their tasks efficiently without frequent interruptions for maintenance or refueling.

Another significant characteristic of the White Outdoor 769-01923A is its cutting deck. The cutting deck is engineered for optimum efficiency, allowing the user to achieve a clean and precise cut every time. The deck size offers a suitable balance between maneuverability and coverage, enabling users to navigate tight spaces while still covering a larger area swiftly.

The equipment also boasts advanced design features that enhance usability. One of these is its ergonomic handles, which provide comfort during prolonged use. The adjustable height feature allows users to customize their mowing or trimming experience according to their individual preferences and the terrain being worked on. This adaptability makes it an excellent choice for diverse outdoor conditions.

In terms of technology, the White Outdoor 769-01923A utilizes advanced cutting mechanisms that ensure less clogging and a smoother operation. This technology significantly enhances the device's overall performance, particularly when handling thicker grasses or uneven terrains. Additionally, the machine is designed with ease of maintenance in mind, featuring accessible components for quick servicing.

Moreover, the durability of the 769-01923A sets it apart from many competitors. Constructed with high-quality materials, it is built to withstand the rigors of outdoor use. Whether facing rugged terrains or variable weather conditions, this equipment is designed to endure, ensuring a long life span and making it a valuable investment for anyone serious about outdoor work.

In conclusion, the White Outdoor 769-01923A is a powerful, reliable, and user-friendly tool that stands out in the landscaping and gardening market. With its robust engine, efficient cutting deck, ergonomic design, and durable construction, it delivers exceptional performance for various outdoor tasks. Whether for professional landscaping or residential gardening, this machine is equipped to meet the demands of any user effectively.
Top Page Image Contents