LISTENING MODE

5.1 Channel and Stereo Modes

Most currently released DVDs, video cassettes and audio compact discs and many TV broadcasts are encoded with 2 channel Stereo or 5.1 channel. Audio discs and tuner broadcasts are in Stereo.

1 Press the INPUT SOURCE button on the front panel of the main unit repeatedly to select one of the audio input sources, or press the SOURCE button on the REMOTE to select directly your required audio input source. The corresponding indicator will light.

NOTE: The factory’s default input source is DVD with 5.1 channel sound output. When the set is turned to ON, the DVD indicator and 5.1 channel indicator will be on and sound will come out of 5 speakers plus the subwoofer. To change 5.1 channel to 2 channel output, press the SPEAKER CHANNELS button. The sound will only come out of 2 front speakers plus the subwoofer.

2Press the SPEAKER CHANNELS button on the REMOTE control to select 5.1 channel or 2 channel sound.

3When 2 channel sound is selected, the center & rear speaker volume controls will, of course, not work.

NOTE: Aboutfuse replacement.

In the unusual event that nothing lights up and no sound, your fuse may have blown. To check for a blown fuse, follow the steps below.

GOOD FUSE

BLOWN FUSE

1. Open the fuse cover (on the back of the main set) by using a Philips screwdriver to unscrew the fuse cover cap.

2. Examine the fuse . If a wire shows, the fuse is good.

23

3. If the wire is broken in the middle, replace with a 1.6A 250V “T” type glass fuse.

“T” means time delay or slow blow fuse.

IB-HT391-WM-E-073003

Page 24
Image 24
Lenoxx Electronics HT-391 manual Listening Mode, Channel and Stereo Modes