LOCATION OF CONTROLS
REMOTE CONTROL
1
2
5 
3
6 
4
7
8 
9
10 
1.IR DIODE - Sends the signal to the set. Do not block or cover this.
2.ON/STANDBY button - Switches the player from STANDBY to ON or ON to STANDBY (if the main POWER of the set is ON).
3.SOURCE button - Press to select the sound input source you want: DVD, AUX or GAME.
4.RESET button - Press to adjust all speakers’ output to the factory’s default settings.
5.MUTE button - Instantly turns off the sound. Press again to restore the sound.
6.SPEAKER CHANNELS button - Press to select 2 channel or 5.1 channel listening mode.
7.SUBWOOFER UP & DOWN VOLUME button - Press to adjust the individual SUBWOOFER’s sound level.
8.CENTER UP & DOWN VOLUME button - Press to adjust the individual CENTER speaker’s sound level.
9.REAR button - Press to adjustthe REAR LEFT/RIGHT speakers’sound level.
10.MASTER VOLUME UP & DOWN button - Press to adjust the sound level of all speakers.
SEE NEXT PAGE FOR REMOTE CONTROL BATTERY INSTALLATION.
5 |
