White Outdoor Single-Stage Snow Thrower warranty Snow Thrower Setup, Contents of Carton

Page 6

3

Snow

Thrower

Setup

NOTE:

This Operator’s Manual covers several models. Snow thrower features vary by model. Not all features discussed in this manual are applicable to all snow thrower models.

NOTE:

All references to left or right side of the snow thrower is from the operating position only.

IMPORTANT: Do not use the chute handle to lift

the snow thrower.

1

Figure 3-1

2

1

Figure 3-2

Chute Handle

Figure 3-3

NOTE: This Operator’s Manual covers several models. Snow thrower features vary by model. Not all features discussed in this manual are applicable to all snow thrower models.

NOTE: All references to left or right side of the snow thrower is from the operating position only

Contents of Carton

Carton contents are listed below with part numbers in parentheses.

21. Two Ignition Keys (725-0201)

2. 20 oz. Bottle 5-30W Oil (737-0209)

3. Extension Cord (if so equipped) (629-0071)

WARNING: Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

Positioning the Upper Handle

NOTE: Remove packing material, if present.

1.Making sure not to pinch the cable in the process, pivot the upper handle into the operating position as illustrated in Figure 3-1 until it clicks into place.

2.Tighten the wing knobs to secure the handle in place as in Figure 3-1.

Assembling the Discharge Chute

For shipping reasons, the snow thrower has been

3 packaged with the upper chute pivoted all the way down. To pivot it upward, proceed as follows:

NOTE: Turn the chute until the chute opening is facing straight ahead.

1.Remove the wing knob, flat washer and carriage bolt from the lower chute. See Figure 3-2.

2.Pivot the upper chute upward over the lip on the lower chute so that there is NO gap between the upper chute and the lower chute.

3.Re-secure with the hardware just removed. If installed correctly, your snow thrower should look like Figure 3-3.

IMPORTANT: Do not use the chute handle to lift the snow thrower

Page 5 Page 7
Image 6
Page 5 Page 7
Contents OPERATOR’S Manual Single-Stage Snow ThrowerTable of Contents Safety Labels Your ResponsibilitySafe Operation PracticesTrainingPreparation Maintenance & Storage Safe Operation PracticesOperation Positioning the Upper Handle Snow Thrower SetupContents of Carton Assembling the Discharge ChuteKnow Your Snow Thrower Gas and Oil Fill-Up OperationBefore Starting Electric Starter if so equipped To Start EngineOperating the Snow Thrower Recoil StarterTo Stop Engine Operating TipsReplacing Shave Plate Adjustments MaintenanceShave Plate Control CableEngine Before servicing Repairing, or inspect Ing, disengageReplacing Belt LubricationPreparing Engine Do not drain Carburetor if using Fuel stabilizerOff-Season Storage Preparing Snow ThrowerTrouble Shooting Problem Possible CausesModel Series 2B5-295 Snow Thrower Part List3622 Description Kits For parts and/or Accessories Please call our MANUFACTURER’S Limited Warranty for

Single-Stage Snow Thrower specifications

The White Outdoor Single-Stage Snow Thrower is designed for efficient snow removal, combining power and convenience into a compact unit ideal for residential use. This snow thrower is particularly suited for light to moderate snowfall, making it an essential tool for homeowners seeking to maintain clear driveways, walkways, and patios during winter months.

One of the standout features of the White Outdoor Single-Stage Snow Thrower is its powerful engine, which allows for easy start-ups even in the coldest weather. The snow thrower typically comes with a reliable 4-cycle engine, providing optimal performance and smooth operation. This engine eliminates the need for mixing fuel and oil, simplifying the refueling process.

The single-stage design of the snow thrower makes it lightweight and easy to maneuver while still delivering impressive snow-clearing capabilities. The auger system efficiently scoops up snow and throws it out of the chute with remarkable force, allowing users to uncover large areas quickly. With a clearing width of around 21 inches, it can handle most driveways and sidewalks with ease.

Ergonomics is a key consideration in the design of the White Outdoor Single-Stage Snow Thrower. It features a convenient adjustable handle, which provides comfort and control during operation. The chute can be easily directed to the left or right, enabling precise snow placement exactly where you want it.

Another important characteristic of this snow thrower is its ability to handle different snow types. Whether the snow is light and fluffy or heavier and wetter, the machine is engineered to tackle a variety of conditions. Additionally, its low-profile design allows it to effectively clear close to the ground, leaving surfaces clean and free of residual snow.

For added safety and durability, the White Outdoor Single-Stage Snow Thrower incorporates high-quality materials and components. Its rugged construction ensures that it can withstand the rigors of frequent use during harsh winter conditions.

In summary, the White Outdoor Single-Stage Snow Thrower is a reliable, efficient, and user-friendly solution for homeowners seeking to simplify snow removal. With its powerful engine, ergonomic design, and effective clearing capabilities, this snow thrower stands out as a valuable addition to any winter toolkit.
Top Page Image Contents