Yard-Man E643E, E663H manual Know Your Snow Thrower

Page 7

SECTION 4: KNOW YOUR SNOW THROWER

WARNING: Be familiar with all the controls on the snow thrower and their proper operation. Know how to stop the machine and disengage them quickly.

Auger Control

The auger drive clutch is located on the left handle. Squeeze the clutch grip to engage the augers. Release to stop the snow throwing action. (Traction control must also be released.) See Figure 6.

Chute Directional Control

The chute directional control is located on left side of the snow thrower.

To change the direction in which snow is thrown, turn chute directional control as follows:

•Crank clockwise to discharge to the left.

•Crank counterclockwise to discharge to the right.

Traction Control / Auger Control Lock

The traction control is located on the right handle. Squeeze the traction control to engage the wheel drive. Release to stop.

This lever also locks the auger control so you can turn the chute directional control without interrupting the snow throwing process. If the auger control is engaged along with the traction control, the operator can release the auger control (the left handle) and the augers will remain engaged. Release the traction control to stop both the augers and wheel drive.

IMPORTANT: Always release tractional control before changing speeds.

Shift Lever

The shift lever is located in the center of the handle panel and is used to establish both ground speed and direction of travel. It can be moved into any of eight positions. See Figure 6.

Forward

Your snow thrower has six forward (F) speeds. Position number one (1) is the slowest. Position number six (6) is the fastest.

Reverse

Your snow thrower has two reverse (R) speeds. R1 is the slower, while R2 is the faster of the two.

IMPORTANT: Always release tractional control before changing speeds.

Chute Tilt Control

The distance snow is thrown can be varied by adjusting the pitch of the chute assembly. Move the chute tilt control forward to decrease the distance, or toward the rear to increase the distance. See Figure 6.

Fuel Shut-off Valve (if so equipped)

The fuel shut-off valve, located under fuel tank, controls fuel flow from the tank. Always make certain it is in the Open (vertical) position before attempting to start the engine. See Figure 6.

Headlight

The headlight is on whenever the engine is running.

Throttle Control

The throttle control is located on the engine. It regulates the speed of the engine.

Ignition Key

The ignition key must be fully inserted in the switch before the unit will start. Remove the ignition key when snow thrower is not in use.

IMPORTANT: Do NOT attempt to turn the key.

Chute Clean-out Tool

WARNING: Never use your hand to clear a clogged discharge chute. Shut off engine and remain behind handles until all moving parts have stopped before unclogging.

IMPORTANT:The chute clean-out tool (see Figure 6) is designed to clear a clogged discharge chute. Refer to Operating Your Snow Thrower on page 10 for detailed instructions on how to properly use the chute clean-out tool.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operator’s Manual Table of Contents Training Important Safe Operation PracticesMaintenance and Storage Assembling Your Snow Thrower Loose PartsTire Pressure Adjustment Chute Clean-Out ToolFinal Adjustments Traction Control and Shift Lever AdjustmentKnow Your Snow Thrower Electric Starter Operating Your Snow ThrowerBefore Starting Gas And Oil Fill-up Starting EngineTo Engage Drive To Stop EngineTo Engage Augers Drift Cutters if so equipped Operating Tips Chute Assembly AdjustmentChute Directional Control Support Bracket Adjustment Traction Control AdjustmentDrive Wheels Shift Rod AdjustmentAuger Control Adjustment Skid ShoesAugers ServiceMaintaining Your Snow Thrower LubricationDrive Belt Belt Removal And ReplacementShave Plate and Skid Shoes Auger BeltServicing Friction Wheel Rubber Off-season Storage Problem Cause Remedy TroubleshootingModel E663H & E643E Parts List Part Description Models E663H & E643E3132 Models E663H & E643E Models E663H & E643E 748-0360 Pulley 26 -0654A Hex Washer Screw 3/8-16 x 629-0071 64 a B 746-0896 Models E663H & E643E Page MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio 44136-0019 Phone MANUFACTURER’S Limited Warranty for

E663H, E643E specifications

Yard-Man is a renowned brand in outdoor power equipment, known for its robust lawn mowers and garden tools tailored for efficiency and performance. Two notable models from their lineup are the Yard-Man E643E and the E663H, both designed to meet the diverse needs of homeowners and garden enthusiasts.

The Yard-Man E643E is a lightweight yet powerful electric lawn mower. It features a 14-inch cutting deck, making it perfect for small to medium-sized yards. The mower is powered by a potent 12-amp electric motor that provides the efficiency of a gas mower without the noise and emissions. One of the standout features of the E643E is its adjustable cutting height, which ranges from 1 inch to 3 inches, allowing users to customize the grass height according to their preferences and seasonal needs. This model is equipped with a rear bagger that collects clippings for easy disposal, ensuring a clean and manicured appearance for your lawn.

On the other hand, the Yard-Man E663H is a self-propelled gas mower built for those who require a more robust solution for larger lawns. It features a 21-inch steel cutting deck, which allows for wider cutting paths, reducing mowing time. The E663H is powered by a reliable Honda engine, known for its durability and efficiency. This model also offers multiple cutting height settings, ensuring versatility in grass management. An ergonomic handle with variable speed control makes it comfortable for users to operate, while the rear-wheel drive enhances traction, especially on uneven terrains.

Both models incorporate innovative technologies that enhance user experience. The E643E’s electric motor ensures quiet operation, making it ideal for residential areas without the disturbance typically associated with gas mowers. The E663H, meanwhile, utilizes a swingback blade system that enhances cutting efficiency and provides a clean cut while reducing the risk of blade damage from obstacles.

In terms of durability, both mowers are constructed with high-quality materials designed to withstand the rigors of landscape maintenance. Easy maintenance features, such as tool-less access to the blade and easy cleaning options, further cement their practicality.

In summary, both the Yard-Man E643E and E663H offer distinct advantages tailored to different user needs. The E643E is perfect for eco-conscious homeowners seeking an electric solution, while the E663H serves those needing a powerful, robust gas mower. Each is designed to make lawn care a hassle-free task, contributing to a healthier and more appealing outdoor space.
Top Page Image Contents