Yard Machines E665E, E645E, 615, E6A5E manual Maintenance and Storage

Page 4

•When cleaning, repairing, or inspecting, make certain collector/impeller and all moving parts have stopped. Disconnect spark plug wire and keep away from plug to prevent accidental starting.

•Do not run engine indoors, except when starting engine and transporting snow thrower in or out of building. Open doors. Exhaust fumes are dangerous.

•Do not clear snow across the face of slopes. Exercise extreme caution when changing direction on slopes. Do not attempt to clear steep slopes.

•Never operate snow thrower without guards, plates, or other safety protection devices in place.

•Never operate snow thrower near glass enclosure, automobiles, window wells, drop off, etc., without proper adjustments of snow thrower discharge angle. Keep children and pets away.

•Do not overload machine capacity by attempting to clear snow at too fast a rate.

•Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when backing.

•Never direct discharge at bystanders or allow anyone in front of unit.

•Disengage power to collector/impeller when transporting or not in use.

•Use only attachments and accessories approved by the manufacturer of snow thrower (such as wheel weights, counter weights, cabs, etc.).

•Never operate the snow thrower without good visibility or light. Always be sure of your footing and keep a firm hold on the handles. Walk, never run.

•Muffler and engine become hot and can cause a burn. Do not touch.

MAINTENANCE AND STORAGE

•Check shear bolts, engine mounting bolts, etc., at frequent intervals for proper tightness to be sure equipment is in safe working condition.

•Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow engine to cool before storing in any enclosure.

•Always refer to operator's manual instructions for important details if snow thrower is to be stored for an extended period.

•Run machine a few minutes after throwing snow to prevent freeze up of collector/impeller.

•Check clutch controls periodically to verify they engage and disengage properly and readjust if necessary. Refer to operator's manual for adjustment instructions.

YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

DANGER

AVOID INJURY FROM ROTATING AUGER - KEEP HANDS, FEET ANDCLOTHINGAWAY.

WARNING

1.STOP ENGINE BEFORE REMOVING DEBRIS AND SERVICING UNIT

2.KEEP CLEAR OF IMPELLER WHILE ENGINE IS RUNNING

3.NEVER DIRECT DISCHARGE AT BYSTANDERS OR WINDOWS OR ALLOW ANYONE IN FRONT OF UNIT

4.THOROUGHLY INSPECT THE AREA WHERE THE EQUIPMENT IS TO BE USED AND REMOVE ALL DOOR MATS, SLEDS, BOARDS, WIRES AND OTHER FOREIGN OBJECTS

5.REFER TO OWNERS MANUAL FOR FULL INSTRUCTIONS

Safety Labels Found on Snow Thrower

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Operator’s Manual Table of Contents Important Safe Operation Practices TrainingMaintenance and Storage Contents of Hardware Pack Tools required for assembly Assembling Your Snow ThrowerUnpacking Loose parts in carton See FigureAttaching speed selector plate and shift lever hardware c Assembling the handles and handle panel hardware a and bAttaching the chute assembly hardware e Attaching the clutch cables hardware dFinal assembly and adjustments Auger control clutch Traction control clutch and shift lever adjustmentKnow Your Snowthrower Safety ignition key Operating Your Snow ThrowerGas and oil fill-up Electric starter optional Starting engineStopping engine To engage driveTo engage augers Tire chains optional equipmentChute assembly adjustment Skid shoe adjustmentTraction control clutch adjustment Auger clutch adjustmentMaintaining Your Snow Thrower Service Belt removal and replacementAuger belts AugersDrive belt Changing the friction wheel rubberOFF-SEASON Storage Trouble Shooting Guide Trouble Possible Causes Corrective ActionParts List for Models 615E Through E665E Part DescriptionModels 31A-615, E6A5E, E645E, and E665E Control Panel Assembly E645, E665 3133 Part Description Blower Housing Wheel Assemblies Model no Size Model Models E6A5E, E645E and E665E MANUFACTURER’S Limited Warranty for

615, E665E, E6A5E, E645E specifications

Yard Machines has consistently been at the forefront of innovation in outdoor power equipment, offering a diverse range of products to cater to various lawn care needs. Among their impressive lineup, the Yard Machines E645E, E6A5E, E665E, and 615 stand out due to their advanced features, user-friendly designs, and reliable performance.

The Yard Machines E645E is primarily designed for smaller yards, featuring a powerful 12-amp motor that provides ample cutting power. This model boasts a lightweight design, making it easy to maneuver. One of its key features is its adjustable cutting height, allowing users to easily customize their mowing experience to suit different grass lengths. The collapsible handle offers enhanced storage options, making it an excellent choice for those with limited storage space.

Next in line, the E6A5E combines performance with convenience. This electric mower features a robust 15-amp motor, delivering quiet yet effective mowing. The E6A5E is equipped with a mulching capability, letting users recycle grass clippings back into the lawn for added nutrients. Additionally, the easy-start feature eliminates the hassle of pull cords, enabling quick and hassle-free operation.

The Yard Machines E665E elevates lawn care with a versatile design that caters to larger areas. Its advanced 20-inch cutting deck allows for efficient mowing, while the dual-lever height adjustment provides six different cutting positions. The E665E is built with durability in mind, constructed from high-quality materials to withstand rigorous lawn maintenance. This model also comes with a 3-in-1 feature, allowing users to mulch, side discharge, or collect clippings, ensuring flexibility for various mowing situations.

Lastly, the Yard Machines 615 model is a robust option designed for extensive outdoor spaces. Featuring a self-propelled drive system, the 615 makes tackling hilly terrain effortless. The powerful engine ensures that no turf is left uncut, while its 21-inch cutting deck enhances efficiency. The 615 also includes large rear wheels, providing excellent traction and stability even on uneven ground.

In conclusion, the Yard Machines E645E, E6A5E, E665E, and 615 models showcase the brand's commitment to high-quality lawn care solutions. With their diverse features, innovative technologies, and user-focused designs, these models facilitate effective lawn maintenance for users of all experience levels. Whether you have a small yard or an expansive landscape, Yard Machines has a trusted option to meet your needs.
Top Page Image Contents