Land Pride Snow Plow Final Blade Installation, Blade Angle Operation, Method Two

Page 3

Land Pride

Assembly Instructions

Hinge (#2) to the Blade with the 1/2" x 1 " Bolts and Locknuts (#15). Tighten Nuts to 60 Ft Pounds of Torque. See diagram below.

Remove the two Blade Spring Attaching Brackets (#8) from the LEFT side of the Blade Hinge. Fasten one on either side of the Blade Hinge as shown in the parts breakdown and picture.

Hang the two Blade Springs (#16) from the top holes in the Blades ribs. Place the Eyebolts (#14) onto the springs and fasten the Eyebolts to the Blade Spring Attaching Brackets (#8) using the two locknuts.

Spring tension may be set stiffer by tightening the locknuts on the Eyebolts, or for less tension loosen the Locknuts. Setting the tension stiffer means the blade will not trip as easily as when set with less tension.

These Instructions are for the Push Tube Assembly only.

Final Blade Installation

Position the Push Tube Assembly (#1) under the machine. Lift the rear of the assembly up and secure it to the Push Tube Attaching Brackets using the 3/8" Clevis Pins and #3 Hairpins provided in the Attaching Kit.

The Blade Stops (#4) on either side of the Blade Hinge are shipped loose. By turning the Stops around, the pitch of the Blade changes. The recommended pitch is one that allows the top and bottom of the blade to be perpendicular to the ground. Set the Stops to the desired position, they must be the same on both sides, and tighten the bolts on the stops fully.

The Blade Skids on 60" blades are installed up side down at the factory for shipping/boxing purposes. Turn the Blade Skids around by loosening the two end bolts on the Blade and tighten the Bolts before using the Blade.

Blade Angle Operation

To move the Blade Left, Right or Straight, pull the Blade Position Lever (#5) forward and turn the blade to the desired position. The Lever will automatically spring into the slot when the Blade reaches the proper angle.

Blade Lift Operation with a winch

Method One:

The blade can be lifted using the winch. Hook the winch hook onto the slot in the Blade Position Lever Bracke (#3) and lift with the winch. See diagram below.

Install the Blade Position Lever (#5), and Blade Position Spring using the 5/16" x 2 1/4" Bolt (#12), Roller Bushings, and 5/16" Nylock Locknut provided. See picture above. Tighten bolt fully and THEN

LOOSEN JUST ENOUGH TO ALLOW THE BLADE POSITION LEVER TO MOVE FREELY. Both Roller Bushings on the LEFT side.

Method Two:

Some assembly may be done for you.

Align the Cable Pulley (#1) between the two Snatch

06/26/07 ■

Manual No. 701-157M

3

Image 3
Contents Land Pride Service Department East North Street 701-067A NT 60 Snow Plow 701-068A ST 60 Snow PlowOperation Blade Connection Assembly InstructionsMethod Two Final Blade InstallationBlade Angle Operation Blade Lift Operation with a winchPlow Mount 823-230C ST Mount KIT-SNOW Plow W/INST823-227C NT Mount KIT-SNOW Plow W/INST Washer Flat 5/8 SAE PLT Steel Snow PlowSteel Snow Plow NUT HEX Nylock 5/16-18 PLTPush Arms for Snow Plow 803-078C NUT Lock 3/8-16 Nylon Insert ST Mount KIT-SNOW PlowBlade Mount Clevis PINNT Mount KIT-SNOW Plow Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

Snow Plow specifications

The Land Pride Snow Plow is a highly efficient and durable solution designed for snow removal tasks, specifically tailored for compact tractors, UTVs, and ATVs. Known for its superior performance and innovative features, the Land Pride Snow Plow has become a popular choice among both residential and commercial users.

One of the standout features of the Land Pride Snow Plow is its robust construction. Designed with high-quality materials, the plow is built to withstand the harsh conditions typical of winter weather. The heavy-duty frame provides stability and strength, allowing the plow to handle even the heaviest snowfall. The durable blade, often made of high-carbon steel, ensures long-lasting performance and resistance to wear and tear.

Another key characteristic is the plow's adjustable blade angle. Operators can easily change the blade angle from the operator's seat, allowing for versatile and efficient snow removal. This feature is particularly beneficial when tackling large areas, as it enables users to push snow to either side or straight ahead, depending on the task at hand.

The Land Pride Snow Plow also incorporates advanced technologies that enhance its functionality. Many models come equipped with hydraulic lift systems, allowing for smoother and more controlled adjustments. This technology not only simplifies the lifting and lowering of the blade but also improves user ergonomics, enabling operators to focus on the job rather than struggling with manual adjustments.

Additionally, the snow plow boasts various sizes and configurations, making it suitable for different applications. Whether it’s for residential driveways, commercial parking lots, or even agricultural use, there’s a Land Pride Snow Plow model tailored to meet specific needs. This flexibility ensures that operators can select the right plow for their equipment and snow-removal requirements.

Maintenance is also made easy with accessible grease fittings and a straightforward design, which simplifies routine upkeep and prolongs the life of the equipment. Land Pride emphasizes customer satisfaction and support, providing comprehensive manuals and assistance to ensure that users get the most out of their snow plow.

In conclusion, the Land Pride Snow Plow represents a blend of durability, efficiency, and advanced technology, making it a top choice for anyone looking to tackle winter snow removal challenges. With its customizable features and ease of use, it stands out as a reliable companion for all snow-clearing tasks.