Configuration Standalone | Chauvet Pix instruction

Configuration

(Standalone)

Static Color Mode

Automatic Mode

Custom Static Color Mode

Set the product in one of the standalone modes to control without a DMX controller.

∙Connect the product to a suitable power outlet.

Never connect a product that is operating in any standalone mode (either Static, Auto, or Sound-Active) to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.

To enable the Static Color mode, do the following:

1.Press <MENU> repeatedly until C--shows on the display.

2.Press <ENTER>.

3.Use <UP> or <DOWN> to choose a color (C1-C7).

4.Press <ENTER>.

To enable the Automatic mode, follow the instructions below:

1.Press <MENU> repeatedly until P--shows on the display.

2.Press <ENTER>.

3.Use <UP> or <DOWN> to choose your auto program (P1–P7).

4.Press <ENTER>.

You can adjust the speed of the automatic program as well.

1.Press <MENU> repeatedly until S--shows on the display.

2.Press <ENTER>.

3.Use <UP> or <DOWN> to adjust the duration of each step of the automatic program from S001 (slow) to S100 (fast).

4.Press <ENTER>.

When using the sound-active auto programs, the product will respond only to low frequencies of music (bass and drums). Adjust the sound sensitivity knob to increase the sound sensitivity until the product responds to sound as desired.

To enable the Custom Static Color Mode, follow the instructions below:

1.Press <MENU> repeatedly until U--shows on the display.

2.Press <ENTER>.

3.Press <UP> or <DOWN> to choose between colors (r--, g--, b--).

4.Press <ENTER>.

5.Press <UP> or <DOWN> to choose the intensity of the color (000–100).

6.Repeat the steps to mix additional colors to create the color you need.

7.Press <ENTER>.

Page 16 of 21

COLORband™ PiX User Manual Rev. 6