Buffalo Technology HS-DGL setup guide Link Navigator Software

Step 3: Link Navigator Software

Insert the LinkNavigator CD into the PC’s CD-ROM drive. Depending on the PC’s confi guration, the EasySetup program may launch. If

it does not automatically launch, manually launch it by pressing the ‘Start’ menu and selecting the ‘Run...’

option. When the ‘Run’ dialog opens, type x:\easysetup.exe (where X is the drive letter of the CD-ROM drive). Press ‘OK’ to continue.

Link Navigator is now running.

Please press the ‘Install IP Setup Utility’ button, then press the ‘Start’ button.

The LinkStation IP Address Confi guration Utility will launch and begin scanning for all available LinkStation devices on the network.

The IP Setup Utility allows you to easily confi gure LinkStation’s network settings. The ‘Search’ button will re-scan the network for all available LinkStations. The drop down menu lists all available LinkStations. If there are multiple LinkStations on the network, then select the proper LinkStation from the drop down menu. Once the

proper LinkStation has been selected from the drop down menu, press the ‘Change IP Address’ button.

4