Craftsman 536885211 manual Know Your Snow Thrower, Ignition On, Chute ControlRod Lower Handle

Page 6

KNOW YOUR SNOW THROWER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR SNOW THROWER, Compare the illustrations with your SNOW THROWER to familiarize

yourself with the location of various controls and adjustments. Save this manual for future reference.

ElectricStart Ignition Off

ignitionOn

.....

Oil/Fuel Mixture Primer Button

Spark Plug

Aug

Chute ControlRod

Lower Handle

\

Chute

 

Starter

 

Button

 

REAR

 

Switch BOX

Auger Assembly

_enition Switch

 

Y

Auger Control Bar - Starts and stops the auger which propels the snow thrower.

Chute Control Rod - Changes the direc- tion of snow discharge,

Chute Deflector - Changes the distance the snow is thrown.

Discharge Chute - Changes the direction the snow is thrown.

Ignition Switch Key - Must be inserted and turned to the ON position to start the engine.

Choke Control - Used to start a cold en- gine

Primer Button - Injects fuel directly into the carburetor manifold for fast starts in cold

weather.

Recoil Starter Handle - Starts the engine manually.

Electric Starter Button - Used to start the engine using the 120V electric starter.

Spark Plug Access Panel - Aides in spark plug removal.

Image 6
Contents Snow Thrower Before USE May reach an open flame Fuel Safety Operating Safety Do not operate this machine if you areRepaipjadjustmentssafety To Remove Snow Thrower from Carton ChecklistKnife to cut carton To Assemble the Snow ThrowerKnow Your Snow Thrower Ignition OnChute ControlRod Lower Handle Gasoline and OIL Mixture To Control Snow DischargeTo USE Auger Propel Action Mix gasoline and oil as followsTo Stop Engine To Start Engine ElectricCold Start Warm Start To Start Engine Recoil StartDRY and Average Snow Product SpecificationsSnow Throwing Tips WET Packed SnowSnow Thrower After First USE Lubrication ChartGeneral Recommendations After Each USETo Adjust the Chute Crank Assembly To Adjust the Auger Control CableTo Remove Belt Cover Remove top cover Reinstall in reverse orderRemove the gas cap Tighten screw and nutTo Replace the Drive Belt To Replace the AugerEngine Service Adjust Engine SpeedTo Remove Bottom Cover Engine Storage Steps belowSnow Thrower Storage OtherTrouble CauseCorrection