Harbor Freight Tools 91924 manual Product Specifications, Save This Manual, General Safety Rules

Page 2
PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS

Construction:

High Impact Plastic Motor

Frame with Alloy Steel Handle

 

 

 

Plowing Width:

12"

 

 

 

Power Cord:

16

AWG x 3 prong, 17" long

 

 

 

Power Rating:

11

Amps at 800 - 1000 Watts

 

 

Electric Requirement:

110 - 120V AC, 60Hz

 

 

 

Overall Dimensions:

24-1/5"L x 16-1/3"W x 23-4/5"H

 

 

Plowing Depth:

9-1/2"

 

 

Power Switch:

Double Safety Switch

 

 

Motor Speed:

1950 rpm

 

 

Net Weight:

22.5 Lbs.

 

 

This compact, lightweight Snow Thrower is used for clearing snow from patios, small driveways, or steps. It can clear a path up to 12” wide in snow up to 9-1/2” deep, if used in a manner set forth below. You can choose among three different snow throwing heights and directions. It features a safety lock Trigger for your protection.

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and as- sembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1.Keep your work area clean and well lit. Cluttered work areas and poor lighting invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as snow or ice. Provide barriers or shields as needed.

SKU 91924

For technical questions, please call 1-800-444-3353.

Page 2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Electric Snow Thrower 11 AMP For technical questions, please callASSEMBLY AND OPERATING INSTRUCTIONS 91924SAVE THIS MANUAL PRODUCT SPECIFICATIONSGENERAL SAFETY RULES WORK AREA4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user ELECTRICAL SAFETYPERSONAL SAFETY TOOL USE AND CARE 12. Avoid accidental starting. Be sure the Trigger is off before plugging in. Carrying power tools with your finger on the Trigger, or plugging in power tools with the Trigger on, invites accidents5. Always keep the extension cord away from moving parts on the tool SPECIFIC SAFETY RULESSERVICE 8. Never lay the Snow Thrower down until the motor has come to a complete stop. The tool may create unforeseen risk while the motor cycles down GROUNDED TOOLS TOOLS WITH THREE PRONG PLUGS outlet installed by a qualified electricianGROUNDING FIGURE AFIGURE B EXTENSION CORDSDOUBLE INSULATED TOOLS TOOLS WITH TWO PRONG PLUGS See Figure C, next pageFIGURE C SYMBOLOGYRECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS 120 VOLT V ~ ASnow Thrower Main Component Snow Thrower Handle 2 Locking Knobs ASSEMBLY AND OPERATING INSTRUCTIONSUNPACKING Upper Handle KnobsDirection Flaps Direction Control LeverHeight Control Lever the direction of thrown snowINSPECTION, MAINTENANCE, AND CLEANING ther use. Do not use damaged equipmentPARTS LIST ASSEMBLY DIAGRAM PLEASE READ THE FOLLOWING CAREFULLY
Top Page Image Contents