Harbor Freight Tools 91924 manual

Page 6

8.Never lay the Snow Thrower down until the motor has come to a complete stop. The tool may create unforeseen risk while the motor cycles down.

9.Never leave the Snow Thrower unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.

10.Always unplug the Snow Thrower from its electrical outlet before perform- ing any inspection, maintenance, or cleaning procedures.

11. WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.

SKU 91924

For technical questions, please call 1-800-444-3353.

Page 6

Image 6
Contents Electric Snow Thrower 11 AMP For technical questions, please callSave this Manual Product SpecificationsGeneral Safety Rules Work AreaElectrical Safety Personal SafetyTool USE and Care Specific Safety Rules ServicePage Grounding Grounded Tools Tools with Three Prong PlugsSee Figure C, next Extension CordsDouble Insulated Tools Tools with TWO Prong Plugs See Figure CSymbology Recommended Minimum Wire Gauge for Extension CordsVolt Assembly and Operating Instructions UnpackingDirection Control Lever Height Control Lever Direction of thrown snowINSPECTION, MAINTENANCE, and Cleaning Ther use. Do not use damaged equipmentParts List QtyAssembly Diagram Please Read Following Carefully