Husqvarna 12524SB manual To Remove Wheels See Fig, Carburetor, Engine Speed

Page 17

SERVICE AND ADJUSTMENTS

TO REMOVE WHEELS (See Fig. 21)

•Remove the klik pin and remove wheel from axle.

IMPORTANT: When installing wheel, be sure to use the in- nermost hole in axle and the wheel hub hole. To disengage drive system from the wheels (for pushing or transporting the snow thrower), remove klik pin from wheel hub and insert pin into the outermost hole in axle only.

KLIK PIN

OUTER HOLE

 

INNER

 

HOLE

WHEEL

WHEEL HUB

FIG. 21

NOTE: To seal punctures or prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

ENGINE

See engine manual.

CARBURETOR

Your carburetor is not adjustable. Engine performance should not be affected at altitudes up to 7,000 feet (2,134 meters). If your engine does not operate properly due to suspected carburetor problems, take your snow thrower to a qualified service center.

ENGINE SPEED

Never tamper with the engine governor, which is factory set for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous and will void the warranty. If you think the engine-governed high speed needs adjusting, contact a qualified service center, which has proper equipment and experience to make any necessary adjustments.

TO ADJUST CABLE TENSION (See Fig. 22)

Adjust cable tension by turning the adjuster turn buckle, located on the right hand cable. Grasp the long section tightly and turn the short section to lengthen the adjuster. Adjust until cable is snug.

ADJUSTER TURN

BUCKLE

FIG. 22

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 12524SB Thoroughly inspect the area where the equipment is Never attempt to make any adjustments whileEngine motor is running except when specifically Crushed rock surfaceTable of Contents HOW to SET UP Your Snow Thrower Assembly / PRE-OPERATIONParts Packed Separately in Carton Remove Snow Thrower from CartonUnfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Check Tire Pressure Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotater Head See Fig Know Your Snow Thrower OperationPrimer Ignition KEYElectric start button used for starting the engine Meets A.N.S.I. Safety RequirementsSkid plate used to adjust height of scraper bar from Ground Stopping HOW to USE Your Snow ThrowerTo USE Fuel SHUT-OFF Valve See Fig To USE Choke Control See FigTo Adjust Skid Plates See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig Release the auger control lever and shut off the engineScraper BAR See Fig Before Starting the EngineCheck Engine OIL Level See Fig ADD Gasoline See FigIf Recoil Starter has Frozen Snow Throwing TipsBefore Stopping General Recommendations MaintenanceBefore Each USE LubricationEngine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector Shear Bolts See FigTo Replace Belts See Fig To Remove Wheels See Fig To Adjust Cable Tension See FigCarburetor Engine SpeedOther StorageFuel System Engine OILTroubleshooting 532 42 85-35 06.17.09 CL Warranty Statement

12524SB specifications

The Husqvarna 12524SB is a powerful and versatile snow thrower designed to tackle even the toughest winter conditions. Built for homeowners seeking efficiency and reliability, this machine stands out for its impressive performance and innovative features.

At the heart of the 12524SB is a robust 291cc engine that provides exceptional power. This engine ensures that snow is cleared quickly and effectively, capable of handling heavy snowfall with ease. The electric start feature allows for convenient operation in frigid temperatures, enabling users to start the machine with a simple push of a button, eliminating the hassle of pull-starting in the cold.

One of the defining characteristics of the Husqvarna 12524SB is its powerful clearing system. With a 24-inch clearing width and the ability to throw snow up to 33 feet, this snow thrower is perfect for driveways and sidewalks. The reinforced steel auger quickly breaks up compacted snow and ice, while the high-speed impeller maximizes throwing distance, making it suitable for various snow conditions.

The machine features an adjustable skid shoe design, allowing users to customize the height of the auger for optimal performance on different surfaces. This adaptability is particularly useful for preserving the integrity of driveways and sidewalks, as it minimizes damage to underlying surfaces while effectively removing snow.

Husqvarna has incorporated user-friendly controls into the 12524SB design. The ergonomic handlebar provides comfort during operation, reducing fatigue during long periods of use. Additionally, the remote chute control allows for quick and easy adjustments to the direction of the snow discharge without needing to stop the machine.

Another key feature is the LED headlights, which enhance visibility during late-night or early-morning snow removal tasks. This ensures that users can operate the snow thrower safely and effectively, regardless of the time of day.

Durability is also a strong point for the Husqvarna 12524SB. Constructed with high-quality materials, the machine is built to withstand harsh winter conditions, ensuring reliability for years to come.

In summary, the Husqvarna 12524SB is a feature-rich snow thrower, combining a powerful engine, efficient clearing capabilities, and user-friendly design. Its array of innovative technologies makes it an excellent choice for homeowners looking to invest in a dependable snow removal solution that can handle even the heaviest snowfalls. Whether navigating long driveways or tackling sidewalks, the 12524SB is designed to make winter maintenance a breeze.
Top Page Image Contents