Husqvarna 96193006900 Install Discharge Chute / Chute Rotator Head See Fig, Check Tire Pressure

Page 7

ASSEMBLY / PRE-OPERATION

INSTALL DISCHARGE CHUTE / CHUTE ROTATOR HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotator head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotator head over chute bracket. If neces- sary, rotatechute assembly to align square and pin on un- derside of chute rotator head with holes in chute bracket.

3.With chute rotator head and chute bracket aligned, position chute rotator head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATOR

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATOR HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

INSTALL CHUTE DEFLECTOR REMOTE CONTROL (See Figs. 8 and 9)

1.Install remote cable bracket to discharge chute with 5/16-18 carriage bolt and 5/16-18 locknut as shown. Tighten securely.

2.Install remote cable eyelet to chute deflector with 1/4-20 shoulder bolt and 1/4-20 locknut as shown. Tighten nut securely. Eyelet will be loose on shoulder bolt.

3.Install spring hooks between hex nuts on chute rotater head and into hole in chute deflector as shown.

1/4-20

SPRING

CHUTE

SHOULDER

DEFLECTOR

BOLT

 

 

HOOK

 

BETWEEN

 

HEX NUTS

 

ON CHUTE

1/4-20

ROTATER

LOCKNUT

HEAD

 

5/16-18

 

CARRIAGE

 

BOLT

CABLE

 

EYELET

 

REMOTE

 

CABLE

 

BRACKET

 

5/16-18

 

LOCKNUT

 

FIG. 8

CHUTE DEFLECTOR

CONTROL LEVER

FIG. 9

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14-17 PSI.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 16530 EXL Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Rotator Head Mounting Chute Deflector Remote ControlParts Packed Separately in Carton EXT RA Shear Bolts and NutsUnfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsInstall Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerRecoil auxiliary starter handle used for starting engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Adjust Skid Plates See FigBefore Starting the Engine If Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingLubrication MaintenanceGeneral Recommendations Before Each USESnow Thrower CleaningEngine Shear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Engine Speed To Adjust Cable Tension See FigTo Remove Wheels See Fig CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting Limitations and Exclusions HOW to Obtain Service Consumer Wheeled Warranty Chart 532 43 58-96 05.19.10 TH

96193006901, 96193006900, 16530 EXL specifications

The Husqvarna 16530 EXL is a robust and versatile lawn mower designed to meet the needs of homeowners who demand efficiency and performance in their outdoor maintenance tasks. With model numbers 96193006901 and 96193006900, this mower stands out for its combination of advanced features, cutting-edge technology, and user-friendly operation.

One of the key characteristics of the Husqvarna 16530 EXL is its powerful engine. This mower is equipped with a reliable engine that provides ample power for tackling even the toughest grass and uneven terrains. The engine's design ensures excellent fuel efficiency, allowing users to mow large areas without frequent refueling.

The cutting deck of the Husqvarna 16530 EXL is engineered for precision and durability. It features a wide cutting width, which enables users to cover more ground in less time. The deck height can be easily adjusted, offering versatility for different grass lengths and types, ensuring that lawn care is tailored to the specific needs of each yard.

Another notable feature of the Husqvarna 16530 EXL is its innovative blade design. The mower is equipped with high-performance blades that deliver a clean and even cut, promoting healthy grass growth. Additionally, the mower's mulching capability allows for efficient nutrient recycling, as finely cut grass clippings are returned to the lawn, enriching the soil.

The design of the Husqvarna 16530 EXL prioritizes user comfort and ease of use. With ergonomic handles and intuitive controls, the mower provides a smooth and enjoyable mowing experience. The lightweight construction adds to the mower's maneuverability, making it easy to navigate around obstacles.

In terms of technology, the Husqvarna 16530 EXL incorporates features such as anti-vibration systems, which reduce fatigue during prolonged use. The mower is also designed for easy maintenance, with accessible components that facilitate quick and hassle-free servicing.

Durability is another hallmark of the Husqvarna brand, and the 16530 EXL is no exception. Built with high-quality materials, this mower is designed to withstand the rigors of regular use, ensuring longevity and reliability.

In summary, the Husqvarna 16530 EXL (96193006901, 96193006900) offers an impressive blend of power, efficiency, and user-friendly features. With its advanced technology, ergonomic design, and durable construction, this mower is an excellent choice for homeowners looking to maintain a beautiful and healthy lawn with ease.
Top Page Image Contents