Husqvarna ST 324P warranty Operation, Know Your Snow Thrower

Page 8

OPERATION

KNOW YOUR SNOW THROWER

READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR SNOW THROWER. Compare the illustrations with your snow thrower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

These symbols may appear on your snow thrower or in literature supplied with the product. Learn and understand their meaning.

DANGER

OR WARNING

FORWARD REVERSE EAR PROTECTION RECOMMENDED

DANGER

PRIMER

READ AND FOLLOW ALL SAFETY INFORMATION

AND INSTRUCTIONS BEFORE USE OF THIS PRODUCT. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

DO NOT PLACE HANDS		DANGER, KEEP FEET AWAY
NEAR BLADES		DANGER, KEEP FEET AWAY
NEAR BLADES
REMOVE SPARK	DANGER
PLUG WIRE BEFORE	READ OPERATORS MANUAL
PERFORMING	WATCH FOR THROWN OBJECTS
MAINTENANCE	OPERATE AT A SAFE DISTANCE FROM OTHER PEOPLE

DANGER, KEEP HANDS AWAY

DISENGAGED

		ENGAGED
	SNOW	TRACTION	IGNITION KEY.
	SNOW	TRACTION	INSERT TO START
	DISCHARGE	DRIVE CONTROL	INSERT TO START
	DISCHARGE	DRIVE CONTROL	AND RUN,
			AND RUN,
			PULL OUT TO STOP.

8

Image 8

Contents Operator’s Manual Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Uhmw Skid PlatesAssembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Unfold Upper HandleInstall Traction Drive Control ROD See Figs Install Auger Control ROD See FigsCheck Tire Pressure Install Discharge Chute / Chute Rotator Head See FigInstall Chute Deflector Remote Control See Figs Operation Know Your Snow ThrowerMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineHOW to USE Your Snow Thrower StoppingTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig Before Starting the Engine To TransportTo Start Engine Before StoppingSnow Throwing Tips If Recoil Starter has FrozenMaintenance General RecommendationsBefore Each USE LubricationCleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector Shear Bolts See FigTo Replace Belts See Fig To Adjust Cable Tension See Fig To Adjust Traction Belt and Auger Belt TensionTo Remove Wheels See Fig CarburetorStorage OtherFuel System Engine OILTroubleshooting Problem Cause CorrectionConsumer Wheeled Products Limited Warranty HOW to Obtain Service Consumer Wheeled Limited Warranty Chart Armor Protected Stamped Deck Shell Example Below Service Notes Service Notes 06/17/2014 AP