Husqvarna ST 151 warranty Installing the Discharge Chute, Filling the Engine with Oil, Procedure

Page 6

ASSEMBLY

Installing the Discharge Chute

Procedure

1.Install the chute deflector to the discharge chute using bolts and, washer, nut, deflector knob and cap plunger (Figure 6).

2.Install the discharge chute to the chute base using three screws and nuts.

Filling the Engine with Oil

ENGINE

See engine manual.

LUBRICATION

NOTE: SAE 10W30 or SAE 5W30 oil is acceptable for use in cold temperatures if engine is difficult to start.

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils

8

1

will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

7

 

 

 

 

 

 

9

 

 

4

6

10

5

 

3

2

2

 

3

 

 

Figure 6

 

1.

Deflector

6.

Discharge chute

2.

Carriage bolts

7.

Carriage Bolt

3. Flange nuts 5/16-18

8.

Shoulder Bolt

4.

Washer

9.

Flange nuts 1/4-20

5.

Knob

10. Cap Plunger

IMPORTANT: Do not overtighten the flange nuts; other- wise you may damage the discharge chute.

Change the oil after every 25 hours of operation or at least once a year if the snow thrower is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil fill cap / dipstick securely each time you check the oil level.

1.Move the snowthrower to a level surface.

2.Clean around the dipstick (Figure 7).

NOTE: Dipstick location may vary depending on engine type.

3. Remove either side mounted filler cap dipstick or high oil fill dipstick and wipe it clean.

1

Fill if oil isbelow “Add” on the

GLSVWLFN

Fill if oil is

below letter

“L” on the

¿OOHUFDS

Figure 7

1.Oil filler cap/dipstick

4.Insert the dipstick into the filler neck and turn clockwise until fully seated. Then remove the dipstick by turning it counter-clockwise.

5.Fill oil to "FULL" on dipstick with the recommended oil.

6.Securely screw in the oil filler cap/dipstick.

6

Image 6
Contents Operator’s Manual 115 68Safe Operation Practices for Walk-Behind Snow Throwers TrainingPreparation Maintenance and Storage OperationClearing a Clogged Discharge Chute Table of Contents Know Your Snow ThrowerInstalling the Handle AssemblySetup Loose PartsInstalling the Discharge Chute ProcedureFilling the Engine with Oil Product Overview Product OverviewFilling the Fuel Tank OperationOperation Checking the Engine Oil LevelElectrical cord can become damaged, causing a shock or fire Starting the EngineDisengaging the Auger Blades Adjusting the Discharge Chute and Chute DeflectorEngaging the Auger Blades Stopping the EngineClearing a Clogged Discharge Chute Preventing Freeze-up After UseOperating Tips Adjusting the Control Cable MaintenanceMaintenance Adjusting the Control CableInspecting the Auger Blades/ Scraper Bar Changing the Engine OilServicing the Spark Plug Inch 76 mm Replacing the Drive Belt Storage StorageTroubleshooting TroubleshootingService Notes Consumer Wheeled Products Limited Warranty HOW to Obtain Service Consumer Wheeled Limited Warranty Chart Armor Protected Stamped Deck Shell Example Below 07/09/2014 TH/AP
Related manuals
Manual 24 pages 41.21 Kb

ST 151 specifications

The Husqvarna ST 151 is a well-known snow blower designed to tackle winter's toughest challenges while ensuring ease of use and reliability. Aimed primarily at homeowners with medium-sized driveways and sidewalks, this equipment combines innovative features with powerful performance, making it an ideal choice for anyone looking to manage snow efficiently.

One of the standout features of the ST 151 is its compact and lightweight design. Weighing in at just around 121 pounds, it allows for easy maneuverability, ensuring users can navigate tight spaces and corners without hassle. This makes it especially appealing for residential users who need to clear snow from narrow driveways or pathways. The unit is powered by a reliable 1.6 kW engine, providing robust performance that allows it to tackle various snow conditions while maintaining excellent efficiency.

The ST 151 is equipped with a durable auger and efficient throwing mechanism, which together work to quickly and effectively clear snow. The auger is designed to collect snow efficiently, while the impeller throws the snow up to 33 feet away, allowing for impressive snow displacement. This feature is particularly useful for users living in areas where heavy snowfall is common, as it reduces the need for repeated passes.

Another noteworthy aspect of the Husqvarna ST 151 is its adjustable discharge chute. The user-friendly lever allows for easy manipulation of the chute direction, enabling operators to control where the snow is thrown. This functionality enhances overall efficiency and allows for effective snow management without the risk of damaging surrounding areas.

For added convenience, the snow blower comes equipped with an easy-start system, which allows for reliable ignition even in cold weather. This is complemented by its ergonomic controls, including a comfortable grip, allowing users to operate the machine with minimal effort. The wheels are designed for optimal traction, ensuring stability and control on slippery surfaces.

Safety is also a priority with the Husqvarna ST 151. The snow blower includes features designed to keep the user secure while operating the machine, further enhancing the overall user experience. With its combination of power, efficiency, and user-friendly design, the Husqvarna ST 151 stands out as an excellent choice for homeowners looking to maintain their property during the winter months. Its commitment to durability and performance makes it a reliable partner in snow removal tasks.