Limited Warranty & Service, Nonrental | Ariens 30SB, 45SB, 36SB

Snow BEAST	Limited Warranty & Service			30SB, 36SB, 45SB


		Length of Warranty: *(from the date of original retail purchase)

		Noncommercial/	Commercial	Rental
Products Covered by this Warranty		Nonrental
Engine		24 months	90 days	90 days

Transmission		12 months	90 days	90 days
Snow blower		12 months	90 days	90 days

*LENGTH OF WARRANTY: Batteries supplied with applicable products as standard, original equipment are covered by this warranty for a period of 90 days from the date of original retail product purchase. Consumable parts such as oil, spark plugs, ﬁlters, dirty carburetors, and augers/impeller are not covered by this warranty.

To Qualify for this Warranty

The product must be purchased in the United States from a dealer authorized by GXi Outdoor Power, LLC to sell those products. This warranty applies to ﬁrst retail purchaser/owner during the applicable warranty time period. SAVE YOUR PROOF OF PURCHASE RECEIPT.

What GXi Outdoor Power Will Repair or Replace under Warranty

GXi will repair or replace, at its option, any part that is proven to be defective in material or workmanship under normal use during the applicable warranty time period subject to the exclusions stated herein. This warranty is void if the owner fails to follow the prescribed maintenance and operating procedures described in this manual. This speciﬁcally refers to ensuring routine lubrication and oil changes are made, that fuel stabilizer is used when the product is stored and that the product is not overloaded.

GXi has the right to recover warranty administration costs from the owner if the root cause of the malfunction is found to be other than defective material or workmanship. In particular, this warranty does not cover: contaminants in the fuel or oil; damage caused by not following the prescribed warnings and operating practices; failure to follow proper maintenance and storage procedures; and physical damage due to misuse, shipping, handling or storage.

Warranty repairs will be made without charge for parts and labor for the ﬁrst year.

Anything replaced under warranty becomes the property of GXi. Parts replaced under warranty will be considered as part of the original product and any warranty on those parts will expire coincident with the original product warranty.

To Obtain Warranty Service

You must take the BEAST product, accessory, replacement part, apparel or the power equipment on which the accessory or replacement part is installed, and proof of purchase, at your expense, to any BEAST service location in the United States, who is authorized to service that product, during the service location’s normal business hours. If you are unable to obtain warranty service, or are dissatisﬁed with the warranty service you receive, take the following steps: First, contact the manager of the service center involved; normally this will resolve the problem. However, if you should require further assistance, write or call the GXi Parts and Service, LLC.

Exclusions

This warranty does not cover: normal wear, contaminants in the fuel or oil; damage as a result of use in an application for which the product was not designed; damage caused by incorporation or use of unsuitable attachments or parts, unauthorized alteration, or other misuse and neglector; damage caused by failure to follow the prescribed warnings, operating practices, proper maintenance and storage procedures; parts affected or damaged by accident and/or collision; damage due to shipping, handling, storage or any causes other than defects in material or workmanship of the product. The customer is responsible for transporting the snow-blower to and from the service center. Pick Up & Delivery will depend on if the service center provides this service, and will be made at the owner’s expense.

Disclaimer of Consequential Damage and Limitation of Implied Warranties

GXi disclaims any responsibility for loss of time or use of the product, transportation, commercial loss, or any other incidental or consequential damage. Any implied warranties are limited to the duration of this written limited warranty.

THIS WARRANTY IS VOID IF THE MANUFACTURING DATE AND THE SERIAL NUMBER ON THE EQUIPMENT HAS BEEN REMOVED OR THE EQUIPMENT HAS BEEN MODIFIED.

EMISSION CONTROL SYSTEM INFORMATION

The U.S. and California Clean Air Acts

EPA and California regulations require all manufacturers to furnish written instructions describing the operation and maintenance of emission control systems. The following instructions and procedures must be followed in order to keep the emissions from your BEAST engine within the emission standards. Maintenance, replacement, or repair of the emission control devices and systems may be performed by any engine repair establishment or individual, using parts that are ‘‘certiﬁed’’ to EPA standards.

The emission control systems on your BEAST engine were designed, built, and certiﬁed to conform with EPA regulations. We recommend the use of genuine BEAST parts whenever you have maintenance done. These original-design replacement parts are manufactured to the same standards as the original parts, so you can be conﬁdent of their performance. The use of replacement parts that are not of the original design and quality may impair the effectiveness of your emission control system. A manufacturer of an aftermarket part assumes the responsibility that the part will not adversely affect emission performance. The manufacturer or re-builder of the part must certify that use of the part will not result in a failure of the engine to comply with emission regulations. Emission controls are covered by this warranty for all uses for a period of 2 years from original retail purchase date, this coverage extends to subsequent owners of the product with proof of original purchase. For emissions warranty service call 1-800-393- 0668 or e-mail customerservice@gxioutdoorpower.com .

V8.10.25.12	Snow BEAST Snow Blower

45SB, 36SB, 30SB specifications

Ariens is a well-respected name in the outdoor equipment industry, particularly known for its snow blowers. Among their range of products, the 30SB, 36SB, and 45SB models stand out due to their robust features, advanced technologies, and exceptional performance. Each model is designed to meet different snow-clearing needs, making them suitable for homeowners and professionals alike.

The Ariens 30SB is built for efficiency with a powerful engine that is capable of handling moderate to heavy snowfalls. Its 30-inch clearing width allows users to tackle large amounts of snow in less time, making it ideal for residential driveways and sidewalks. The 30SB also features Ariens' innovative Auto-Turn steering technology, which provides effortless maneuverability around obstacles and makes the snow-clearing process much simpler. The chute system is fully adjustable, allowing for precise snow direction control, further increasing its efficiency.

The 36SB model takes things a step further with a 36-inch clearing width, making it suitable for larger properties or commercial use. This snow blower is equipped with a high-performance engine that delivers improved torque, enabling it to handle even the heaviest snow with ease. The 36SB also includes the same Auto-Turn technology as the 30SB, ensuring smooth handling. Additionally, it features heavy-duty, steel construction, enhancing durability and longevity. Its LED headlights provide better visibility during nighttime operations, adding convenience for those who need to clear snow in the dark.

For those needing an even more robust solution, the Ariens 45SB model is designed for the heaviest snowfall conditions. With an impressive 45-inch clearing width, it is more than capable of tackling large commercial areas and expansive driveways. The 45SB is engineered with a powerful commercial-grade engine, delivering maximum performance and reliability in the toughest conditions. It features a two-stage snow removal system that efficiently breaks down ice and heavy snow, while its reinforced steel construction ensures it can withstand years of use. The model also boasts heated hand grips for added comfort in frigid weather, as well as an adjustable chute that offers customizable snow throwing angles.

In summary, the Ariens 30SB, 36SB, and 45SB snow blowers bring a range of impressive features and technologies to the table, catering to various snow-clearing demands. With their robust engines, user-friendly controls, and durable construction, these models are trusted solutions for anyone looking to efficiently clear snow and keep their properties safe and accessible during winter.

Snow BEAST