Ariens 36SB, 45SB, 30SB Operation Safety Precautions, Equipment Operation-Safety Precautions

Page 7

Snow BEAST

Operation Safety Precautions

30SB, 36SB, 45SB

 

 

 

Equipment Operation—Safety Precautions

1.Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect. Carbon monoxide is odorless, tasteless, and can be fatal.

2.Never operate the snow blower without good visibility or light.

3.Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

4.Never operate the snow blower with defective guards or shields, or without the safety devices securely mounted in place and functioning properly.

5.Be aware of discharge and never direct discharge of material toward people or areas where property damage can occur. Keep children and others away.

6.Do not change the governor settings or over speed the engine.

7.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

8.Always stop the engine when you leave the snow blower, even for a moment.

9.To help reduce fire hazard, keep the engine and the area around the engine free of grass, leaves or any other type of foreign material.

10.Beware of any sharp edges. For safety always wear gloves when performing augers/impeller maintenance activities

11.If lightning is seen or thunder is heard in the operators vicinity, do not operate machine. Instead find shelter, as lightning may cause injury/death.

12.After striking a foreign object, stop the engine, remove the wire from the spark plug, thoroughly inspect the snow blower for any damage, and repair the damage before restarting and operating the snow blower.

13.If machine starts to vibrate or function abnormally, stop the engine immediately and check for cause. Vibration is generally a warning of trouble.

14.Keep hands and feet away from augers/ impeller . This product is capable of amputating hands and feet.

15.Be alert and slow down when making turns. Also look left, right, and behind before changing directions and reversing to be sure there is a clear path.

16.Never operate snow blower at high transport speeds on slippery surfaces.

17.Never operate snow blower under the influence of alcohol and drugs.

18.Use care when loading or unloading the machine into a trailer or truck.

19.Use care when approaching blind corners, shrubs, trees, or other objects that may obstruct vision.

20.Always disengage power to augers when not in use or transported.

21.Never listen to music with headphones/ earphones while operating the snow blower.

22.Use extreme caution when operating on slopes.

23.Never touch a hot engine or muffler.

24.Use caution when operating on gravel surfaces.

25.Only use attachments and accessories that are approved by BEAST.

26.When starting the engine pull the cord slowly until some resistance is felt before using full force.

27.Always have a good grip on the handles and never run while operating the snow blower.

28.Stop the engine whenever you leave the operating position, before unclogging the augers/impeller or discharge chute, and when making any repairs, adjustments or inspections.

29.When cleaning, repairing or inspecting the snow blower, stop the engine and make certain the augers/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent someone from accidentally starting the engine.

V8.10.25.12

Snow BEAST Snow Blower

 

3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Snow Blower by Remain with the snow blower if resold Snow BeastBeast Series Contents Safety Information and Warnings Preparation-Safety Precautions Preparation Safety PrecautionsGasoline and other fuels-Safety Precautions Equipment Operation-Safety Precautions Operation Safety PrecautionsShut the Engine OFF Clearing a Clogged Chute-Safety PrecautionsSafety Decal Identification Safety DecalsProduct Specifications Models FeatureControl Panel Control Panel and Snow Blower ComponentsSnow Blower Component Identification Missing Parts Request Form Chute Rotation Snow BEASTAssembly Instructions30SB, 36SB, 45SBControl Panel Handles Directional Discharge ChuteChute Rotation Cable Connection Assembly InstructionsSkid Shoes Need Help With Assembly?Chute Direction Control Cable Support Drift Cutters if desiredAuger and Transmission Control Cables Filling Oil and Gasoline HeadlightStarting the Engine Starting the Engine Using the Recoil StartOperating Instructions Headlights Never use your hands to clean a clogged chute or openingClean Out Tool Chute Direction ControlUsing your Snow Beast General Maintenance Cleaning the Snow blower ProcedureTime Interval Break-in Adjusting Shift Rod Service AdjustmentsAdjusting Augers/Impeller Cable Adjusting Drive CableCheck & Replacing the Transmission Drive Belt Changing Friction Wheel Adjusting Discharge DeflectorReplacing Headlight Bulb Short Term Storage Storage InstructionsExtended Storage Problem Possible Causes Solution TroubleshootingTroubleshooting 30SB Collector Assembly Diagram Key Year Model 2012/13 36SB Collector Assem bly Diagram Key Year M odel 2012/13 45SB Collector Assembly Diagram Key Year M odel 2012/13 Description 30SB, 36SB, 45SB Chassis Assembly ReferenceOEM Replacement Parts Replacement PartsNonrental Limited Warranty & Service

45SB, 36SB, 30SB specifications

Ariens is a well-respected name in the outdoor equipment industry, particularly known for its snow blowers. Among their range of products, the 30SB, 36SB, and 45SB models stand out due to their robust features, advanced technologies, and exceptional performance. Each model is designed to meet different snow-clearing needs, making them suitable for homeowners and professionals alike.

The Ariens 30SB is built for efficiency with a powerful engine that is capable of handling moderate to heavy snowfalls. Its 30-inch clearing width allows users to tackle large amounts of snow in less time, making it ideal for residential driveways and sidewalks. The 30SB also features Ariens' innovative Auto-Turn steering technology, which provides effortless maneuverability around obstacles and makes the snow-clearing process much simpler. The chute system is fully adjustable, allowing for precise snow direction control, further increasing its efficiency.

The 36SB model takes things a step further with a 36-inch clearing width, making it suitable for larger properties or commercial use. This snow blower is equipped with a high-performance engine that delivers improved torque, enabling it to handle even the heaviest snow with ease. The 36SB also includes the same Auto-Turn technology as the 30SB, ensuring smooth handling. Additionally, it features heavy-duty, steel construction, enhancing durability and longevity. Its LED headlights provide better visibility during nighttime operations, adding convenience for those who need to clear snow in the dark.

For those needing an even more robust solution, the Ariens 45SB model is designed for the heaviest snowfall conditions. With an impressive 45-inch clearing width, it is more than capable of tackling large commercial areas and expansive driveways. The 45SB is engineered with a powerful commercial-grade engine, delivering maximum performance and reliability in the toughest conditions. It features a two-stage snow removal system that efficiently breaks down ice and heavy snow, while its reinforced steel construction ensures it can withstand years of use. The model also boasts heated hand grips for added comfort in frigid weather, as well as an adjustable chute that offers customizable snow throwing angles.

In summary, the Ariens 30SB, 36SB, and 45SB snow blowers bring a range of impressive features and technologies to the table, catering to various snow-clearing demands. With their robust engines, user-friendly controls, and durable construction, these models are trusted solutions for anyone looking to efficiently clear snow and keep their properties safe and accessible during winter.
Top Page Image Contents