Ariens 932036 - 524, 932037 - 724, 932505 - 724, 932504 - 524 manual Service and Adjustments

Page 20

SERVICE AND ADJUSTMENTS

WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.

DISCHARGE CHUTE DEFLECTOR

Deflector must stay in selected position while throwing snow.

To adjust, loosen then retighten hardware to desired deflector drag force (Figure 11).

Adjusting

Hardware

Discharge Chute

Deflector

2.Adjust runners by inserting a spacer of desired thickness under center of scraper blade, loosen runner hardware, slide runners to flat surface. Allow 1/8 in.

(3 mm) between scraper blade and hard smooth surfaces. Allow 1-1/4 in. (30 mm) between scraper blade and uneven or gravel surfaces. Retighten hardware.

NOTE: Keep housing level by adjusting runners equally.

2

1

1. Runner

OS0486

 

2. Runner Hardware

 

Figure 11

DISCHARGE CHUTE

OS0113

Figure 13

SCRAPER BLADE

If chute does not stay in position while operating, tighten nut on carriage bolt at pivot point to increase tension on spring (Figure 12).

1

2

3

4

OS0115

1.Pinion

2.Chute Gear

3.Carriage Bolt

4.Spring

Figure 12

RUNNERS

Runners should be adjusted as conditions require (Figure 13).

1.Position unit on a hard, flat, smooth level surface.

IMPORTANT: Damage to auger/impeller housing will result if blade wears down too far.

Scraper blade is adjustable to compensate for wear.

To adjust scraper blade:

1.Tip unit back onto handlebar, support housing and loosen nuts retaining blade.

2.Adjust runners to fully raised position (housing closest to ground).

3.Reposition scraper blade flush with runners and tighten lock nuts.

SHEAR BOLTS

IMPORTANT: Use only Ariens shear bolts for replacement. Use of any other type of shear bolt may result in severe damage to unit.

Occasionally a foreign object may enter the auger/impeller housing and jam the auger, breaking shear bolts (Figure 14) which secure the auger to the shaft. This allows auger to turn freely on the shaft preventing damage to gear drive.

For Replacement:

1.Slide auger outward against roll pin and align hole in shaft with hole in auger (holes in shaft for roll pins and shear bolts line up).

GB - 20

Image 20
Contents Sno-Thro Täyttää seuraavat vaatimukset Jest zgodny z Page Controls and Features English Français EspañolOS2420 Table of Contents IntroductionSafety Safety Decals Locations Required Operator TrainingSafety Rules OS2070 before removing clogs or servicingPage Page Assembly AssemblyInstall Discharge Chute and Chute Crank , 6, Tools RequiredCheck Tire Pressure Check Auger Gearcase OilCheck Engine Crankcase Oil Fill Engine Fuel TankControls and Features OperationChoke Control Knob Axle Lock Pin FigureThrottle Electric StarterFilling Fuel Tank PRE-STARTTo Stop in AN Emergency Starting and Shut OFFTransport Snow RemovalTraveling Maintenance Maintenance ScheduleGeneral Lubrication Auger ShaftService and Adjustments Speed Selector Adjustment Replace Attachment Drive Belt Attachment Drive Belt ReplacementRemove Attachment Drive Belt Traction Drive Belt Replacement Attachment CLUTCH/BRAKE Adjustment Traction Drive Clutch Adjustment Friction Disc Replacement Reinstall Friction DiscRemove Friction Disc Replace Friction DiscService Parts AccessoriesStorage Short TermTroubleshooting Specifications HSSK50 OHSK70Year Limited Sno-Thro Warranty
Related manuals
Manual 31 pages 42.15 Kb

932504 - 524, 932036 - 524, 932505 - 724, 932037 - 724 specifications

Ariens has long been celebrated for its commitment to quality and durability in outdoor power equipment, and the Ariens 932038, 932507, 932039, 932505, and 932508 models are a testament to that legacy. These snow blowers offer a blend of robust performance, advanced technology, and user-friendly features that make them essential for managing winter weather.

The Ariens 932038 model stands out with its 5520 engine, delivering dependable power designed to tackle heavy snowfalls. Its 24-inch clearing width ensures efficient snow removal, while the high-quality, heavy-duty construction guarantees long-lasting performance. Equipped with an adjustable auger, the 932038 can handle a variety of snow conditions, making it versatile for different scenarios.

Similarly, the 932507 model, featuring a powerful 520cc engine, provides significant clearing capabilities. Users will appreciate the 24-inch clearing width and the ability to throw snow up to 50 feet. The unique design includes oversized tires that enhance traction and maneuverability, ensuring users can confidently navigate through driveways and pathways even in deep snow.

The Ariens 932039 model, powered by the 624cc engine, takes snow removal a step further. This powerful machine's 26-inch clearing width allows for faster snow processing, and its auto-turn steering technology provides effortless handling around obstacles, a critical feature for those with tight driveways or pathways.

With the 932505 model, users can utilize the 724cc engine, making it one of the more powerful options in this lineup. Its 28-inch clearing width couples with an advanced impeller system that maximizes snow throwing distance, making it perfect for large areas. Additionally, the heated handgrips improve comfort during prolonged use in frigid conditions.

Finally, the Ariens 932508, equipped with a 624cc engine, combines strength with ease of use. Its user-friendly control panel and electric start feature provide convenience, making it ideal even for those less experienced with snow blowers. The combination of a 26-inch clearing width ensures efficient snow removal, while the durable construction promises longevity.

Each of these Ariens models comes with a host of features designed for efficiency. From adjustable speed settings to high-impact and rust-resistant materials, these machines are built to withstand the rigors of winter. Whether facing light snow or heavy drifts, the Ariens 932038, 932507, 932039, 932505, and 932508 snow blowers deliver the reliability and performance users expect, ensuring that winter does not hinder outdoor activities.