Ariens 932505 - 724, 932036 - 524 Attachment Drive Belt Replacement, Remove Attachment Drive Belt

Page 22

ATTACHMENT DRIVE BELT REPLACEMENT

Remove Attachment Drive Belt

(Figures 16 and 17)

1.Shut off engine, remove key, disconnect spark plug wire and allow unit to cool completely.

2.Remove two screws securing belt cover to unit and remove belt cover.

3.Remove spring pin from chute crank rod assembly and separate.

4.Remove hardware holding chute strap to engine and lift discharge chute off housing.

5.Remove belt finger by removing cap screws mounting belt finger to engine (Figure 17).

6.Remove attachment drive belt from engine sheave (it may be necessary to turn engine sheave using recoil starter handle).

CAUTION: Always support Sno-Thro frame and housing when loosening the cap screws holding them together. Never loosen cap screws while unit is in service position.

IMPORTANT: To avoid bending bottom cover, when tipping unit apart, support handlebars firmly or tip unit up on housing and remove bottom cover by removing four cap screws before separating unit.

7.Support Sno-Thro frame and housing.

8.Remove top two cap screws and loosen lower cap screws holding blower housing to frame (one on each side).

9.Separate housing from unit. Lower handlebar on floor.

10.Remove attachment drive belt from lower pulley (hold brake away from belt).

 

7

 

4

 

 

3

5

 

 

6

 

 

1

 

2

8

 

1. Housing Bolt

5. Chute Crank

Holes

6. Chute Strap

2. Belt Cover

7. Chute Strap

3. Pinion and Gear

Mounting

 

4. Spring Clip Pin

Hardware

 

 

8. Bottom Cover

Figure 16

OS0803

Replace Attachment Drive Belt

1.Place new belt onto lower pulley and while holding brake out of way, tip unit together.

2.Secure blower housing to frame with cap screws.

3.Place belt onto engine sheave.

4.Make sure engine sheave and attachment pulley align. If alignment is necessary, loosen engine sheave set screws, reposition sheave and retighten set screws.

5.Replace belt finger.

IMPORTANT: BELT FINGER MUST BE between 1/16 to 1/8 in. (1.6–3 mm) from belt with attachment clutch engaged or belt grabbing may occur causing impeller to rotate while attachment clutch is disengaged (Figure 17).

6.Adjust clutch per Attachment Clutch/ Impeller Brake Adjustment below.

7.Reinstall chute strap and mounting hardware onto engine.

8.Replace chute crank and secure with spring pin.

9.Replace belt cover and secure with cap screws.

GB - 22

Image 22
Contents Sno-Thro Täyttää seuraavat vaatimukset Jest zgodny z Page Controls and Features English Français EspañolOS2420 Table of Contents IntroductionSafety Safety Decals Locations Required Operator TrainingSafety Rules OS2070 before removing clogs or servicingPage Page Install Discharge Chute and Chute Crank , 6, AssemblyAssembly Tools RequiredCheck Engine Crankcase Oil Check Tire PressureCheck Auger Gearcase Oil Fill Engine Fuel TankControls and Features OperationThrottle Choke Control KnobAxle Lock Pin Figure Electric StarterTo Stop in AN Emergency Filling Fuel TankPRE-START Starting and Shut OFFTraveling Snow RemovalTransport Maintenance Maintenance ScheduleGeneral Lubrication Auger ShaftService and Adjustments Speed Selector Adjustment Remove Attachment Drive Belt Attachment Drive Belt ReplacementReplace Attachment Drive Belt Traction Drive Belt Replacement Attachment CLUTCH/BRAKE Adjustment Traction Drive Clutch Adjustment Remove Friction Disc Friction Disc ReplacementReinstall Friction Disc Replace Friction DiscStorage Service PartsAccessories Short TermTroubleshooting Specifications HSSK50 OHSK70Year Limited Sno-Thro Warranty
Related manuals
Manual 31 pages 42.15 Kb

932504 - 524, 932036 - 524, 932505 - 724, 932037 - 724 specifications

Ariens has long been celebrated for its commitment to quality and durability in outdoor power equipment, and the Ariens 932038, 932507, 932039, 932505, and 932508 models are a testament to that legacy. These snow blowers offer a blend of robust performance, advanced technology, and user-friendly features that make them essential for managing winter weather.

The Ariens 932038 model stands out with its 5520 engine, delivering dependable power designed to tackle heavy snowfalls. Its 24-inch clearing width ensures efficient snow removal, while the high-quality, heavy-duty construction guarantees long-lasting performance. Equipped with an adjustable auger, the 932038 can handle a variety of snow conditions, making it versatile for different scenarios.

Similarly, the 932507 model, featuring a powerful 520cc engine, provides significant clearing capabilities. Users will appreciate the 24-inch clearing width and the ability to throw snow up to 50 feet. The unique design includes oversized tires that enhance traction and maneuverability, ensuring users can confidently navigate through driveways and pathways even in deep snow.

The Ariens 932039 model, powered by the 624cc engine, takes snow removal a step further. This powerful machine's 26-inch clearing width allows for faster snow processing, and its auto-turn steering technology provides effortless handling around obstacles, a critical feature for those with tight driveways or pathways.

With the 932505 model, users can utilize the 724cc engine, making it one of the more powerful options in this lineup. Its 28-inch clearing width couples with an advanced impeller system that maximizes snow throwing distance, making it perfect for large areas. Additionally, the heated handgrips improve comfort during prolonged use in frigid conditions.

Finally, the Ariens 932508, equipped with a 624cc engine, combines strength with ease of use. Its user-friendly control panel and electric start feature provide convenience, making it ideal even for those less experienced with snow blowers. The combination of a 26-inch clearing width ensures efficient snow removal, while the durable construction promises longevity.

Each of these Ariens models comes with a host of features designed for efficiency. From adjustable speed settings to high-impact and rust-resistant materials, these machines are built to withstand the rigors of winter. Whether facing light snow or heavy drifts, the Ariens 932038, 932507, 932039, 932505, and 932508 snow blowers deliver the reliability and performance users expect, ensuring that winter does not hinder outdoor activities.