Bolens 550, 750 manual Table of Contents

Page 2

TABLE OF CONTENTS

 

Content

Page

Important Safe Operation Practices

3

Assembling Your Snow Thrower

5

Know Your Snow Thrower

7

Operating Your Snow Thrower

8

Making Adjustments

10

Maintaining Your Snow Thrower

12

Service

13

Troubleshooting

16

Parts List

17

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new Snow Thrower. It will help you assemble, prepare and maintain the unit for best performance. Please read and understand what it says.

Before you start assembling your new equipment, please locate the model plate on the equipment and copy the information from it in the space provided below. The information on the model plate is very important if you need help from our Customer Support Department or an authorized dealer.

You can locate the model number by looking at the lower frame cover in the rear of your snow thrower. A sample model plate is explained below. For future reference, please copy the model number and the serial number of the equipment in the space below.

(Model Number)

 

(Serial Number)

Copy the model number here:

 

 

 

 

 

 

 

 

WHITE OUTDOOR

Copy the serial number here:

 

PRODUCTS COMPANY

 

 

 

 

 

P.O. BOX 361131

 

 

CLEVELAND, OHIO 44136

 

CALLING WARRANTY SERVICE

If you have difficulty assembling this product or have any questions regarding the controls, operation or maintenance of this unit, please call the Customer Dealer Referral Line.

Call 1- (800)-949-4483to reach the Customer Dealer Referral Line. Please have your unit’s model number and serial number ready when you call. See previous section to locate this information.

For more details about your unit, visit our website at www.whiteoutdoor.com

2

Image 2
Contents OPERATOR’S Manual Table of Contents Preparation Important Safe Operation PracticesTraining OperationMaintenance And Storage Your ResponsibilityUnpacking AssemblyAssembling Your Snow Thrower Loose PartsSkid Shoe Adjustment Final AdjustmentsAuger Control Adjustment Traction Control and Shift Lever AdjustmentKnow Your Snow Thrower Auger Drive ControlOperating Your Snow Thrower To Stop Engine Electric Starter If EquippedRecoil Starter To Engage DriveAuger Control Adjustment Skid Shoe AdjustmentChute Assembly Adjustment Chute Directional Control And Support Bracket AdjustmentShift Rod Adjustment Drive WheelsMaintaining Your Snow Thrower LubricationEngine ServiceBelt Removal And Replacement AugersServicing Friction Wheel Rubber Drive BeltOff-season Storage Troubleshooting Problem Cause RemedyModels 550 Part DescriptionDrive Clutch Cable Auger Clutch Blower Housing Models 550 Models 550 710-0604 Models 550 748-0360 Pulley 26 -0654A Hex Washer Screw 3/8-16 x 629-0071 Light ass’y Model 550 Page Page MANUFACTURER’S Limited Warranty for