Important Safe Operation Practices, Training

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - heed its warning.

WARNING: Engine Exhaust, some of its constituents, and certain vehicle

components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

Training

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

3.Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

4.Never allow adults to operate this machine without proper instruction.

5.Thrown objects can cause serious personal injury. Plan your snow throwing pattern to avoid discharge of material toward roads, bystanders and the like.

6.Keep bystanders, helpers, pets and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

7.Exercise caution to avoid slipping or falling, especially when operating in reverse.

Preparation

1.Thoroughly inspect the area where the equipment is to be used. Remove all door mats, newspapers, sleds, boards, wires and other foreign objects which could be tripped over or thrown by the auger/impeller.

2.Always wear safety glasses or eye shields during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.

3.Do not operate without wearing adequate winter outer garments. Do not wear jewelry, long scarves or other loose clothing which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces.

4.Use a grounded three wire extension cord and receptacle for all units with electric start engines.

5.Adjust collector housing height to clear gravel or crushed rock surfaces.

6.Disengage all clutch levers before starting the engine.

7.Never attempt to make any adjustments while engine is running, except where specifically recommended in the operator’s manual.

8.Let engine and machine adjust to outdoor temperature before starting to clear snow.

9.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

c.Never fuel machine indoors.

d.Never remove gas cap or add fuel while the engine is hot or running.

e.Allow engine to cool at least two minutes before refueling.

f.Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to provide space for fuel expansion.

g.Replace gasoline cap and tighten securely.

h.If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before starting the engine.

i.Never store the machine or fuel container inside where there is an open flame, spark or pilot light (e.g. furnace, water heater, space heater, clothes dryer etc.).

j.Allow machine to cool at least 5 minutes before storing.

Operation

1.Do not put hands or feet near rotating parts, in the auger/ impeller housing or discharge chute. Contact with the rotating parts can amputate hands and feet.

2.The auger/impeller clutch lever is a safety device. Never bypass its operation. Doing so, makes the machine unsafe and may cause personal injury.

750, 550 specifications

The Bolens 750 and 550 are robust garden tractors renowned for their reliability and performance in lawn care and gardening tasks. Designed for both amateur and professional gardeners, these machines provide an exceptional blend of power and versatility.

The Bolens 750 features a powerful engine, typically a 17-20 HP Briggs & Stratton or Kohler, known for their durability and efficient fuel consumption. This tractor is fitted with a hydrostatic transmission system, which ensures smooth operation and ease of use. The hydrostatic system allows the user to control speed and direction effortlessly, making it an ideal choice for navigating tight spaces and varied terrains.

On the other hand, the Bolens 550 offers a slightly lower horsepower, usually around 15 HP, but maintains many of the same core features found in its counterpart. The 550 is designed for users who may need a more compact option without sacrificing performance. Both tractors have a rugged steel frame construction, ensuring longevity and strength, even when subjected to heavy-duty tasks.

A major highlight of both models is their cutting deck, available in various sizes, from 42 inches up to 54 inches. The adjustable cutting height feature allows users to set the desired grass length, providing flexibility for different lawn types and personal preferences. The side discharge option efficiently handles grass clippings, while mulch kits are also available for those who prefer returning nutrients to the soil.

One significant technological advancement in the Bolens 750 and 550 models is their ergonomic design. The comfortable seating, well-placed controls, and easy access points for maintenance make these tractors user-friendly. With a tight turning radius, they excel in maneuverability, making them suitable for properties with intricate landscaping.

Moreover, both tractors come equipped with standard rear and front hitch capabilities, allowing for the attachment of various accessories, such as snow plows, tillers, and aerators. This versatility makes them indispensable tools for year-round yard care and maintenance.

In summary, the Bolens 750 and 550 stand out with their powerful engines, innovative features, and rugged build quality. They cater to a variety of gardening and landscaping needs, offering users unmatched reliability and efficiency in their outdoor tasks. Whether you are tackling expansive gardens or compact lawns, these tractors deliver performance that can help transform any landscape with ease and precision.