Unigreen 20, 50, 40, 55 manual Weather Conditions, Road Circulation, Tables of Fittings Allowed

Page 7

2.4.1TAKING PRECAUTIONS AGAINST FIRE HAZARDS Don’t use naked flames or heat sources near the machines.

The sprayers are made with many materials that derive from petroleum: tanks, tubes, pipes and hoses, wheels and plastic parts; furthermore the presence of oils of various nature and residues of chemical products make them potentially flammable.

2.5MACHINES DESIGNED TO BE USED ONLY WITH CLEAN WATER There are versions of the machines designed only to be used with a hose reel for washing with cold clean water.

These machines cannot be used with chemical products as they don’t have some of the devices or accessories that are needed to use these products safely. These machines are identified by the word “washing” on the CE plate.

2.7WEATHER CONDITIONS

We recommend spraying in the early hours of the morning or late in the afternoon, avoiding the hottest time of day.

Never do any spraying if it’s raining or rain is forecast.

Don’t spray in strong wind or in any case, in winds above 3/5 m/second.

If you have to spray in windy conditions, use relatively low pressures to obtain quite large drops that are less sensitive to drifting (being heavier the wind has less effect). There are also special anti-drift nozzles available from UNIGREEN S.p.A.; for information, please contact our offices.

2.8ROAD CIRCULATION

The admissible capacity of the vehicle (pickup or truck) or the trailer upon which the equipment is positioned should be checked.

The equipment is supplied for application to the floor. In the case of fixed rigging the vehicle needs to be registered.

You need to check the correct couplings with your area dealer.

3CHARACTERISTICS AND SPECIFICATIONS

3.1MACHINE IDENTIFICATION

This handbook is valid for UMP-MASTER sprayers to be used for:

a)treatments with hand lances with or without a hose reel

b)hand lances for washing with or without a hose reel

The UNIGREEN S.p.A. sprayers are identified by the CE plate (FIG. 1 ) bearing one of the marks indicated in the tables of the allowed fittings (TABLE N° 10 , page 19).

3.2TABLES OF FITTINGS ALLOWED

Table N° 10 let you identify the version of your machine indicating the basic equipment and all the possible fittings available (optional).

You can also find the other fittings allowed or other versions to meet your requirements in the future.

THE FITTING DEFINED IN TABLE N° 10 (PAGES 19) SHOULD BE CONSIDERED BINDING FOR THE VALIDITY OF THE DECLARATION OF CONFORMITY.

Other fittings or setups of basic components and optionals should be considered unsafe and therefore are not covered by the guarantee and aren’t UNIGREEN’s responsibility.

The same goes for fittings realised with components or accessories that aren’t original UNIGREEN parts.

UNIGREEN accessories can easily be identified by the label with the yellow background “ORIGINAL UNIGREEN ACCESSORY”

3.3NOISE LEVEL OF THE MACHINE

Use earmuffs to protect your ears when using the machine, the multi-purpose Units produce a maximum level of sound pressure inferior to 89 dB (A) and a level of power inferior to 107Db (A).

Readings taken in accordance with the following standards: Machines Directive 98/37/CE (Ex. Dir.89/392 CE).

Legislative Decree D.Lgs. n°292 of the 4th of September 2002 concerning the environmental acoustic emission of machines and equipment for use outdoors. Legislative Decree D.Lgs. 277/91 on the subject of the protection of workers against the risks deriving from exposure to chemical, physical and biological agents.

TYPE :

 

 

code:

 

massa a vuoto:

Kg.

max press. :

bar

net mass

 

 

 

massa totale ammessa:

Kg.

 

total mass

 

ANNO

 

 

 

YEAR

 

 

 

20

 

 

made in

 

via Rinaldi, 105 - Reggio Emilia ITALIA

Italy

 

FIG. 1

7

Image 7
Contents 2 0 0 UMP MasterPage Tables of Delivery of Nozzles for Hand Lances SummaryComposition of the Manual GuaranteeProduct Responsibility Unigreen spa is not responsible if Intended USE Key to the symbolsProhibited USE Using Chemical ProductsRecommendations Tables of Fittings Allowed Characteristics and Specifications Machine IdentificationWeather Conditions Road CirculationHand Washingtanks Standards of ReferenceUSER’S Instructions Transporting and Movingthe Machine Description of the MachineInternal Combustion Engines TWO STROKE-PETROL- Diesel Preliminary ChecksApplications Motors Electric MotorsPressure Regulator Volumetric pressure valve proportionalPump Suction FilterGeneral Instructions Mixing Test Treatment with Clean WaterFilling the Tank Filling with the Antipollution Ejector FIGHand Lances Washingthe SprayerHose Reel Emptying Tank MaintenanceRoutine Maintenance Extraordinary MaintenanceAny case respect the relevant local legislation in force Putting Back Into Service After Winter LayupStorage in a Warehouse Andtransportation Demolition and DisposalUMP with Motorpumpe TAB 50 h 300 h Table of Programmed Maintenance OperationAllowed Fittings TAB.10UNI 16100008F GB Maggio-05

20, 55, 40, 50 specifications

Unigreen is a prominent name in the agricultural machinery sector, specializing in high-performance sprayers designed for precision farming and crop protection. Among its range, the Unigreen 20, 40, 55, and 50 models stand out due to their innovative features and advanced technologies, making them ideal choices for farmers seeking efficiency and effectiveness in their spraying operations.

The Unigreen 20 is recognized for its compact design, making it an excellent choice for smaller farms or applications requiring maneuverability in tight spaces. It is equipped with a robust tank and a user-friendly control system that allows operators to monitor and adjust spraying settings on the fly, ensuring optimal application rates and minimizing waste.

Moving up the range, the Unigreen 40 model boasts a larger capacity tank, making it suitable for medium-sized operations. One of its main features is the advanced hydraulic suspension system, which ensures stability and uniform application even on uneven terrain. This model also integrates GPS technology, enabling precision mapping of fields to guarantee that every area receives the appropriate treatment.

The Unigreen 55 further expands on these capabilities with enhanced power and efficiency. It features a high-performance pump system that delivers consistent spraying pressure, allowing for a wider coverage area. The sprayer’s adjustable boom technology is designed to reduce drift and increase accuracy, which is essential in environmentally sensitive areas.

Lastly, the Unigreen 50 combines features from the preceding models and introduces cutting-edge automation. This model includes smart sensors that detect plant health, providing real-time feedback on the most effective solutions to apply. The sprayer is also compatible with precision agriculture technologies, such as variable rate application, which optimizes inputs based on specific field conditions.

Each model from Unigreen is constructed with durability in mind, utilizing high-quality materials to withstand the rigors of agricultural use. The user-centric designs ensure ease of operation and maintenance across the range. With options to suit various farming needs, the Unigreen 20, 40, 55, and 50 models exemplify the convergence of technology and practicality in modern agriculture, making them vital assets for farmers striving for sustainability and productivity in their operations.