Cub Cadet 80 LB manual

Page 10

Many factors influence how long PPE (especially respirators) re- mains effective. As well as hours of use, an air-purifying respira- tor’s service life is affected by the concentration of dust and other contaminants in the enviroment; the user’s body size; how strenu- ously the user works while the respirator is worn; and how the res- pirator is stored.

Note: As a result, it’s not possible to specify a length of time after which a respirator should be replaced.

In general, replace a mask or filter when it is visibly dirty or dam- aged, or when you experience difficulty breathing through it. Re- place respirator cartridges when you can smell or taste chemical while or after using the respirator, or according to the manufactur- er’s recommendations. Replacement or repairs shall be done only by experienced person with parts designed for the PPE. No at- tempts shall be made to replace components or to make adjust- ments or repairs beyond the manufacturer’s recommendations.

10

Image 10
Contents LB Stainless Steel Rotary Spreader Ref. Part No. No Description Qty 80LB. Hopper Assembly and Parts ListOptional Jet-Action Deflector Part Description QtyRod Assembly 80LB Frame Assembly and Parts ListOperating Lever Shut-Off Assembly and Parts List Part Description Qty. NoOptional Remote Deflector Part No Mounting Instructions DescriptionOptional Remote 3rd Hole Slide Part No Mounting Instructions Rotary Spreaders Assembly Instructions Spreader Calibration General Requirements-Personal Protective Equipment Osha Standard 1910.132 throughPage Page U.S.A Canada