Land Pride
Introduction
Land Pride welcomes you to the growing family of new product owners.
This pulverizer seeder has been designed with care and built by skilled workers using quality materials. Proper assembly, maintenance, and safe operating practices will help you get years of satisfactory use from this pulverizer seeder.
Application
The SPS2048 and SPS3072 Pulverizer Seeders are designed and built by Land Pride to efficiently do the tasks of seedbed preparation and precision seeding. Both the 48" model and the 72" models are adapted for Category I
Front mounted scarifier shanks open and loosen the soil, while seed cups drop the seed directly into the cultivated soil behind the scarifier shanks. The rear pulverizer roller immediately breaks up unwanted clods, levels the ground, and presses the seed into firm contact with the soil. When soil conditions are right, this can often be done in one highly efficient pass.
The Land Pride SPS2048 and SPS3072 Pulverizer Seeders are well suited for use by professional landscapers and rental yards. They have applications on sod farms, transportation
Using This Manual
•This Operator’s Manual is designed to help familiarize you with safety, assembly, operation, adjustments, troubleshooting, and maintenance. Read this manual and follow the recommendations to help ensure safe and efficient operation.
•The information contained within this manual was current at the time of printing. Some parts may change slightly to assure you of the best performance.
•To order a new Operator’s or Parts Manual contact your authorized dealer. Manuals can also be downloaded,
Terminology
"Right" or "Left" as used in this manual is determined by facing the direction the machine will operate while in use unless otherwise stated.
Definitions
NOTE: A special point of information that the operator must be aware of before continuing.
IMPORTANT: A special point of information related to its preceding topic. Land Pride’s intention is that this information should be read and noted before continuing.
Owner Assistance
The Warranty Registration card should be filled out by the dealer at the time of purchase. This information is necessary to provide you with quality customer service.
If customer service or repair parts are required contact a Land Pride dealer. A dealer has trained personnel, repair parts and equipment needed to service the implement.
The parts on your Pulverizer Seeder have been specially designed and should only be replaced with genuine Land Pride parts. Therefore, should your pulverizer require replacement parts go to your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and model number when ordering parts from your Land Pride dealer. Be sure to include your serial and model numbers in correspondence also. Refer to Figure 1 for the location of your serial number plate.
Serial Number Plate Location | 18493 |
Figure 1 |
|
Further Assistance
Your dealer wants you to be satisfied with your new pulverizer. If for any reason you do not understand any part of this manual or are not satisfied with the service received, the following actions are suggested:
1.Discuss the matter with your dealership service manager making sure he is aware of any problems you may have and that he has had the opportunity to assist you.
2.If you are still not satisfied, seek out the owner or general manager of the dealership, explain the problem and request assistance.
3.For further assistance write to:
Land Pride
Service Department
P.O. Box 5060
Salina, KS
6/26/02 | SPS20 & SPS30 Series Pulverizer Seeders | 5 |