Land Pride SPS30, SPS20 manual Shanks, Shank Working Depth, Clutch Engagement Disengagement

Page 13

Land Pride

Section 3 Adjustments

Shanks

Refer to Figure 3-4:

Shanks can be removed & installed upside down to give dual life to shanks.

1.Remove bolt and nut (#1) from one end of pulverizer.

2.Pull rod (#2) from channel.

3.Flip shanks (#3) over and reinstall rod (#2)

4.Reinstall bolt and nut (#1).

Shank Working Depth

The working depth of the shanks can be adjusted by the gauge wheels.

Place spacers (#2) & (#3) at desired height and secure with pin (#4).

Shanks	Shank Working Depth	18547
Shanks	Shank Working Depth
Figure 3-4	Figure 3-5

Clutch Engagement (Disengagement)

The Clutch can be engaged by turning the pin until the pin slides in the groove. Disengage by pulling out on the pin and turning it until it is out of the groove. (Engaged for seeding.)

Clutch Engagement

Figure 3-6

18492

6/26/02

SPS20 & SPS30 Series Pulverizer Seeders 313-242M

11

Image 13

Contents Pulverizer Seeders Table of Contents Keep Riders Off Machinery Be Aware of Signal WordsFor Your Protection Shutdown and StorageTransporting the Loader and Attachment Practice Safe MaintenanceGetting On and Off Safely While OperatingPrepare for Emergencies Safety at All TimesWear Protective Equipment Avoid High Pressure Fluids HazardImportant Safety Information Safety LabelsApplication Using This ManualOwner Assistance IntroductionAssembly and Set-Up Gauge Wheel AssemblyOperating Check List Tractor RequirementsTractor 3-Point Hookup Seeder Preparation and UseDrive System ParkingOperating Instructions Adjustments Seeding AdjustmentsSeed Rate Speed Change Refer to Figure Roller Down PressureShank Working Depth ShanksClutch Engagement Disengagement Cup Setting 100 Seed Rate Chart for SPS2048Rye Grass Annual Pounds per Acre Fescue Fine Blade, Turf Type Kilograms per Hectare Seed Rate Chart Metric Units for SPS2048Lovegrass Weeping Kilograms per 1000 Square Meters Fescue Fine Blade, Turf Type Pounds per Acre Seed Rate Chart for SPS3072High Range 103 112 121 130 138 146 Low Range Seed Rate Chart Metric for SPS3072 High Range 103 109 116 123 128 Low Range Maintenance and Lubrication MaintenanceStorage LubricationRoller Chains 4 chains Wheel BearingsBed Forming Rollers Rear Speciﬁcations and CapacitiesSPS2048 Width Replaceable heat-treated sleeves Features and BeneﬁtsTroubleshooting Appendix Tire Inflation ChartTire Size Inflation PSIWarranty Corporate Ofﬁce PO. Box 5060 Salina, Kansas 67402-5060 USA