Land Pride PS1548, PS1572 manual Tractor 3-Point Hookup, Transporting, Parking, Drive System

Page 10

Table of Contents

Section 2: Operating Instructions

Land Pride

Tractor 3-Point Hookup

1.Back tractor up to seeder until 3-Point links are aligned with hitch clevises on seeder.

2.Secure tractor’s 3-Point lower links to the lower hitch clevises using 7/8” diameter hitch pins.

3.Secure tractor’s top center link to the seeder top hitch using a 3/4” diameter hitch pin.

4.With the seeder resting on level ground, adjust the tractor’s top link until the seeder is level.

5.Remove rear roller lock pin from parking position and place in storage position. Figure 2-1.

11640

Rear Roller Pin in Field Position

Figure 2-1

Transporting

!CAUTION

When traveling on public roads whether at night or during the day, use accessory light and devices for adequate warning to operators of other vehicles. Comply with all federal, state and local laws.

1.Select a safe ground travel speed when transporting from one area to another. When traveling on roadways, transport in such a way that faster moving vehicles may pass you safely.

2.Reduce tractor ground speed when turning. Leave enough clearance so the seeder does not contact obstacles such as buildings, trees or fences.

3.When traveling over rough or hilly terrain, shift tractor to a lower gear.

Parking

The following steps should be done when preparing to store the seeder or unhitch it from the tractor. See also “Section 4: Maintenance & Lubrication” on Page 20 for additional information on long term storage of your seeder.

1. Park the seeder on a level, solid area.

4.Shut off tractor engine and engage parking brake.

5.To prevent the seeder from tipping backward, remove rear roller lock pin from storage position and place in parking position, Figure 2-2.

6.Unhitch from tractor.

11643

Rear Roller Pin in Parking Position

Figure 2-2

Drive System

Your Primary Seeder uses standard no. 40 roller chain throughout its drive system. The drive system is simple and designed for low maintenance.

1.Check the drive idler arms to insure that they are taking up any excess chain slack.

2.Check each chain to insure that it is not over- tightened.

3.Annually clean and lubricate chain with chain oil.

Roller Packing Wheels

The front and rear roller packing wheels should turn freely. In field position, the rear roller assembly should be free to float up and down to follow the terrain of your field. See Figure 2-1.

8

PS1548 & PS1572 Primary Seeder 313-164M

7/22/05

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Primary Seeder PS1572 PS1548Table of Contents Shutdown and Storage Keep Riders Off MachineryFor Your Protection Land PridePractice Safe Maintenance Use Safety Lights and DevicesUse a Safety Chain Transport Machinery SafelyWear Protective Equipment Safety at All TimesPrepare for Emergencies Avoid High Pressure Fluids HazardSafety Labels Owner Assistance Using This ManualApplication Further AssistanceSling Bracket Pre-Assembly ChecklistSling Brackets Tractor Requirements General DescriptionOperating Check List Seeder Preparation Check ReferenceParking Tractor 3-Point HookupTransporting Drive SystemGenereal Operationg Instructions Seed Rate Speed Change Sprocket Alignment Speed Change & Chain PitchesSeeding Adjustments Seed Rate Adjustment HandleFescue Fine Blade, Turf Type Pounds per Acre Kentucky Blue Grass Pounds per AcreRye Grass Perennial Pounds per Acre Lovegrass Weeping Pounds per AcreRye Grass Annual Pounds per Acre Wheatgrass Crested Pounds per AcreBuffalo Grass Sharps Improved Kilograms per Hectare Fescue Fine Blade, Turf Type Kilograms per HectareLovegrass Weeping Kilograms per 1000 Square Meters Cup Setting 100 Lovegrass Sand Kilograms per HectareLovegrass Sand Kilograms per 1000 Square Meters Orchard Grass Kilograms per HectarePS1572 Seed Rate Charts Fescue Fine Blade, Turf Type Pounds per 1000 Square FeetLovegrass Weeping Pounds per 1000 Square Feet Lovegrass Sand Pounds per AcreLovegrass Weeping Pounds per Acre Buffalo Grass Kilograms per Hectare PS1572 Seed Rate Charts MetricBermuda Kilograms per Hectare Fescue K-31 Kilograms per 1000 Square MetersWheatgrass Western Kilograms per 1000 Square Meters Lubrication MaintenanceStorage Feed Cup Drive ShaftPacker Wheel to Seed Cup Roller Chains 3 chains RequiredPS1548 & PS1572 Primary Seeders Features Benefits Problem Solution Torque Values Chart for Common Bolt Sizes 26 PS1548 & PS1572 Primary Seeder 313-164M Warranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 32 pages 44.19 Kb

PS1572, PS1548 specifications

Land Pride, a renowned name in the agricultural equipment industry, is well-known for its commitment to providing high-quality and reliable implements for farmers and landscapers alike. Among its impressive lineup, the PS1548 and PS1572 models stand out for their exceptional performance and versatility in handling a variety of tasks.

The Land Pride PS1548 and PS1572 are power seeders designed to make planting easier and more efficient. Both models are equipped with robust features that cater to the needs of both residential and commercial users. The PS1548 offers a 48-inch working width, while the PS1572 boasts a larger 72-inch width, enabling users to cover more ground quickly, making them ideal for seeding in large areas.

One of the main characteristics of these power seeders is their precision planting capability. Each model features a seed metering system that ensures even distribution of seeds, regardless of the seed type. This technology helps optimize germination rates and enhances crop yields. Combined with a durable steel frame, these seeders are built to withstand the rigors of frequent use while maintaining accuracy.

The PS1548 and PS1572 have adjustable seed depth settings, allowing users to achieve optimal soil contact for various seed types. This adaptability is critical in achieving the desired growth results in different soil conditions and seed varieties. Additionally, the rear roller on these models provides a smooth finish to ensure proper soil coverage after seeding.

Another notable feature of the Land Pride PS series is the ease of operation. Both models are designed with user-friendly controls, making them suitable for operators of all experience levels. The side extension feature allows users to expand the working width further, granting even more flexibility in their operations.

Land Pride also emphasizes safety and maintenance in its design philosophy. The PS1548 and PS1572 come equipped with safety shields protecting users from moving parts during operation. Furthermore, maintenance is made easy with accessible grease points and components, ensuring long-lasting performance with minimal downtime.

In summary, the Land Pride PS1548 and PS1572 power seeders are essential tools for anyone looking to enhance their planting efficiency. With their precision seeding technology, adjustable depth settings, user-friendly design, and robust construction, these models are a testament to Land Pride's dedication to quality and innovation in agricultural equipment. Whether for residential landscaping or larger agricultural projects, these seeders are reliable companions that help ensure successful crop establishment.
Top Page Image Contents