Land Pride PS1572 General Description, Operating Check List Seeder Preparation, Check Reference

Page 9

Land Pride

Table of Contents

Section 2: Operating Instructions

General Description

The following information is a brief description of how this primary seeder works. It is included to help you understand the operation of this seeder.

The power to drive the seeding function of this seeder comes from the ground speed of the tractor. The seed metering is powered by the front roller at a rate proportional to the distance driven. This ensures that the rate applied in pounds per acre or pounds per 1000 square feet remains constant as ground speed is varied. The power is transmitted via drive chains to the seed cups. This drive can be adjusted to a high or low range to broadcast more or less seed. The seed rate is adjustable using the seed rate lever located at the rear of the seeder. The seed is dropped between cast iron rollers. The front roller crushes clods, presses down small stones and forms a firm seedbed. The rear roller firms the soil around the seeds.

Operating Check List

Seeder Preparation

Before proceeding with the first time set-up, or before making any adjustments mentioned in this section, make every effort to attach the seeder to a tractor.

1.This seeder can be transported with a full box of seeds. It is best not to do this unless necessary because the increased weight does increase the chances for problems on the road. Do not exceed 20 miles per hour.

2.Calibrate your seeder for a proper rate based on the seed you are using. Calibration information is located on the inside of your box lid or on page 11.

3.Make sure the seed cup door adjustment handle on each cup is set the same across the seeder.

4.Never allow anyone to ride on the seeder.

5.Maximum seeding speed will vary according to soil conditions.

6.Check that all plugs and caps have been replaced properly.

In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training involved in its operation, transport, maintenance and storage of equipment. Before beginning to operate your Primary Seeder, the following inspection should be performed.

7.Be sure all bolts and nuts are tight.

8.Be certain all guards are in place and secure.

9.Clear the area to be seeded of rocks, branches and other foreign objects.

10.At first begin seeding at a slow forward speed and shift up until the desired speed is achieved.

 

 

Check

Reference

 

 

Read and follow the “Safety Rules”

Important Safety

 

 

 

 

carefully.

Information

 

 

 

 

 

 

 

 

Read all of the "Tractor Hook Up" and

Section 2

 

 

 

 

preparation instructions.

page 8

 

 

 

 

 

 

 

 

“Basic Operations” in this Manual

Operator’s

 

 

 

 

 

Manual

 

 

 

 

 

 

 

 

 

Lubricate the seeder as needed. Refer to

Section 5

 

 

 

 

"Lubrication"

page 20

 

 

 

 

 

 

 

 

Check the seeder initially and periodically for

Section 8

 

 

 

 

loose bolts & pins, "Torque Values Chart".

page 25

 

 

 

 

 

 

 

 

Make sure all guards and shields are in

Operator’s

 

 

 

 

place.

Manual

 

 

 

 

 

 

 

 

Check initially and periodically for loose bolts,

Operator’

 

 

 

 

pins, and chains.

Manual

 

 

 

 

 

 

 

 

Inspect the seed cups and seed tubes for

Section 4

 

 

 

 

foreign matter.

page 24

 

 

 

 

 

 

 

 

Set speed change sprocket for drive type

Section 3

 

 

 

 

desired.

page 10

 

 

 

 

 

 

 

 

Set seed rate. See "Seed Rate Charts".

Section 3

 

 

 

 

 

page 16

 

 

 

 

 

 

 

Tractor Requirements

This Primary Seeder is designed for tractors in the Category 1 class.

Check the tractor’s 3-point lifting capacity. Refer to “Section 5: Specifications & Capacities” on Page 22 for seeder weight.

NOTE: In order to maintain steering control, ballast may have to be added to your tractor. To determine whether or not to add ballast, refer to your tractor operator’s manual.

7/22/05

PS1548 & PS1572 Primary Seeder 313-164M 7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PS1572 PS1548 Primary SeederTable of Contents For Your Protection Keep Riders Off MachineryShutdown and Storage Land PrideUse a Safety Chain Use Safety Lights and DevicesPractice Safe Maintenance Transport Machinery SafelyPrepare for Emergencies Safety at All TimesWear Protective Equipment Avoid High Pressure Fluids HazardSafety Labels Application Using This ManualOwner Assistance Further AssistancePre-Assembly Checklist Sling BracketSling Brackets Operating Check List Seeder Preparation General DescriptionTractor Requirements Check ReferenceTransporting Tractor 3-Point HookupParking Drive SystemGenereal Operationg Instructions Sprocket Alignment Speed Change & Chain Pitches Seed Rate Speed ChangeSeed Rate Adjustment Handle Seeding AdjustmentsKentucky Blue Grass Pounds per Acre Fescue Fine Blade, Turf Type Pounds per AcreRye Grass Annual Pounds per Acre Lovegrass Weeping Pounds per AcreRye Grass Perennial Pounds per Acre Wheatgrass Crested Pounds per AcreFescue Fine Blade, Turf Type Kilograms per Hectare Buffalo Grass Sharps Improved Kilograms per HectareLovegrass Sand Kilograms per 1000 Square Meters Cup Setting 100 Lovegrass Sand Kilograms per HectareLovegrass Weeping Kilograms per 1000 Square Meters Orchard Grass Kilograms per HectareFescue Fine Blade, Turf Type Pounds per 1000 Square Feet PS1572 Seed Rate ChartsLovegrass Sand Pounds per Acre Lovegrass Weeping Pounds per 1000 Square FeetLovegrass Weeping Pounds per Acre Bermuda Kilograms per Hectare PS1572 Seed Rate Charts MetricBuffalo Grass Kilograms per Hectare Fescue K-31 Kilograms per 1000 Square MetersWheatgrass Western Kilograms per 1000 Square Meters Storage MaintenanceLubrication Feed Cup Drive ShaftRequired Packer Wheel to Seed Cup Roller Chains 3 chainsPS1548 & PS1572 Primary Seeders Features Benefits Problem Solution Torque Values Chart for Common Bolt Sizes 26 PS1548 & PS1572 Primary Seeder 313-164M Warranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 32 pages 44.19 Kb

PS1572, PS1548 specifications

Land Pride, a renowned name in the agricultural equipment industry, is well-known for its commitment to providing high-quality and reliable implements for farmers and landscapers alike. Among its impressive lineup, the PS1548 and PS1572 models stand out for their exceptional performance and versatility in handling a variety of tasks.

The Land Pride PS1548 and PS1572 are power seeders designed to make planting easier and more efficient. Both models are equipped with robust features that cater to the needs of both residential and commercial users. The PS1548 offers a 48-inch working width, while the PS1572 boasts a larger 72-inch width, enabling users to cover more ground quickly, making them ideal for seeding in large areas.

One of the main characteristics of these power seeders is their precision planting capability. Each model features a seed metering system that ensures even distribution of seeds, regardless of the seed type. This technology helps optimize germination rates and enhances crop yields. Combined with a durable steel frame, these seeders are built to withstand the rigors of frequent use while maintaining accuracy.

The PS1548 and PS1572 have adjustable seed depth settings, allowing users to achieve optimal soil contact for various seed types. This adaptability is critical in achieving the desired growth results in different soil conditions and seed varieties. Additionally, the rear roller on these models provides a smooth finish to ensure proper soil coverage after seeding.

Another notable feature of the Land Pride PS series is the ease of operation. Both models are designed with user-friendly controls, making them suitable for operators of all experience levels. The side extension feature allows users to expand the working width further, granting even more flexibility in their operations.

Land Pride also emphasizes safety and maintenance in its design philosophy. The PS1548 and PS1572 come equipped with safety shields protecting users from moving parts during operation. Furthermore, maintenance is made easy with accessible grease points and components, ensuring long-lasting performance with minimal downtime.

In summary, the Land Pride PS1548 and PS1572 power seeders are essential tools for anyone looking to enhance their planting efficiency. With their precision seeding technology, adjustable depth settings, user-friendly design, and robust construction, these models are a testament to Land Pride's dedication to quality and innovation in agricultural equipment. Whether for residential landscaping or larger agricultural projects, these seeders are reliable companions that help ensure successful crop establishment.
Top Page Image Contents