Socket Mobile manual Servo Motor Drive, GTO Control Box Model GTOCP2

Page 16

SERVO MOTOR DRIVE

GTO Control Box – Model GTOCP2

The GTO control box contains all of the circuitry to drive the two servo motors and the logic required to navigate the sky. It will be operational and track at the sidereal rate when connected to both motors of the mount and a power source. In order to control the movement of the mount, you will need to connect at least one of these:

•GTO Keypad controller

•Computer with astronomical software such as DigitalSky Voice (included) or Software Bisque’sTheSky™ (purchased separately).

The GTO Servo Control Box is mounted directly onto the polar axes of the 1200 mount. Please remember that this box contains advanced electronics and must be treated with the same care given to other fine equipment. You can see that the unit is built to be rugged, however it is not indestructible.

R.A. and Dec. Cable Connections

A “Y” cable with 10-pin connectors is included with your mount. Attach the connector from which the two cables emerge to the GTO Control Panel. Attach the short part of the “Y” cable to the R.A. motor housing and the long part of the cable to the Dec motor housing. Lock all connectors. Refer to the section below for further information about positioning the cables.

12V Connector

Place the DC power cord (included with your mount) into the phono plug outlet marked 12V on the GTO Control Panel and lock in place. Plug the cigarette lighter plug end of the cord into your power source. The acceptable voltage range is 11.5 to 16. Suggested power sources include: portable rechargeable battery pack, auto or marine battery, or power supply (filtered and regulated) for 110 volts with a minimum output of 5 amps at 12V DC.

There is no on-off switch. We recommend that you plug the power cable into the servo box after the keypad controller. To turn the unit off, simply disconnect the power cable.

Considerations for observatory installations: We suggest that you disconnect your GTO Control Box from 110V when you are not using your mount so that if your observatory experiences a power surge or lightening strike, your mount electronics will not be damaged. If you operate your mount remotely, you will have to leave your power cable connected just as you do for the rest of your electronic equipment. You may want to consider surge protectors or other protective measures to protect from voltage spikes.

POWER Indicator Light

This LED will remain illuminated when your power source has sufficient output to drive the motors. If the voltage falls below 11 volts, the power light will go out and the motors will stop. The keypad controller will not function properly.

For mounts shipped after 02-25-00: If the LED turns yellow, this means that your motors are overloaded, probably due to an unbalanced load on your mount. Refer to the troubleshooting section of the manual for the solution.

KEYPAD Connector

Attach the 5-pin male connector of the keypad controller and lock in place (push in the knurled ring then turn).

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents ASTRO-PHYSICS Page Operation of the Mounting Page Model 1200GTO Parts List Model GTOCP2 Features and SpecificationsWhy Polar Alignment is Important DiagramIntroduction Compensation for the Earth’s rotationAssembly Instructions Gross Latitude Adjustment Before You Leave HomeAssemble Pier purchased separately Attach Pier Adapter to Pier PostAssemble Polar Axis Assembly to Pier or Tripod Altitude and Azimuth Adjustments Rough polar alignmentAssemble Declination Axis Attach Mounting Plate purchased separately Flat Mounting Plate FP1800Altitude and Azimuth Adjustments Attach Mounting Rings purchased separatelyFine Polar Alignment Methods for fine polar alignmentOperation of the Mounting Dec. Damper KnobsDec. Clutch Knobs Balancing Your TelescopePage Servo Motor Drive GTO Control Box Model GTOCP2RS-232 Connectors Focus ConnectorReticle Connector Autoguider ConnectorMotor Cables Accessory Cables Prevent the Cables from TanglingRemoving the GTO Control Box From 1200 Mount GTO Keypad Controller OperationMount Maintenance and Alignment TroubleshootingPage Installation of Encoders and Encoder Housings -1200 Mount Fitting Declination Encoder HousingFitting Right Ascension Encoder Housing Periodic Maintenance

GTOCP2 specifications

The Socket Mobile GTOCP2 is a cutting-edge portable barcode scanner designed for businesses seeking efficiency and speed in their operations. Renowned for its streamlined functionality and user-friendly interface, the GTOCP2 elevates everyday tasks, offering features tailored to enhance productivity in various settings.

One of the main features of the GTOCP2 is its advanced scanning technology. Equipped with a high-performance 2D imager, this device is capable of quickly scanning a wide range of barcode formats, including QR codes and traditional 1D barcodes. This versatility enables users to capture information accurately and swiftly, bolstering workflow efficiency across diverse applications such as retail, inventory management, and healthcare.

The GTOCP2 also emphasizes connectivity, supporting Bluetooth technology for seamless pairing with smartphones, tablets, and other compatible devices. This wireless capability allows for greater mobility, as users can scan items from a distance without being tethered to a stationary system. Additionally, it's compatible with iOS, Android, and Windows devices, making it an ideal solution for a range of operating environments.

Ergonomics play a significant role in the design of the Socket Mobile GTOCP2. The scanner boasts a compact, lightweight form factor, ensuring comfortable handling during prolonged use. Its intuitive design promotes ease of use, allowing both experienced and novice users to operate it with minimal training. The device also features an adjustable scanning angle, facilitating efficient scanning in various scenarios.

Another noteworthy characteristic of the GTOCP2 is its durability. Constructed to endure the rigors of everyday use in busy environments, it meets IP54 standards for dust and moisture resistance. This durability ensures that the device remains functional even in challenging conditions, making it a reliable choice for industries that demand tough, resilient equipment.

Power management is another area where the GTOCP2 shines. The device is equipped with a long-lasting rechargeable battery, allowing for extensive usage between charges. This feature is particularly beneficial for on-the-go operations, where downtime can lead to decreased productivity.

In summary, the Socket Mobile GTOCP2 stands out for its exceptional scanning capabilities, strong wireless connectivity, ergonomic design, durability, and efficient power management. It is an excellent investment for businesses looking to improve their operational efficiency and streamline their processes, providing a reliable solution that caters to various industry needs.
Top Page Image Contents